PIR Insulation Boards delivery in Craigavon

Which PIR insulation boards can you order in Craigavon?

• Cavity wall boardsBoards sized for partial-fill cavity insulation.
• Thermal laminate boardsPIR bonded to plasterboard.
• General-purpose PIR boards2400 × 1200 mm foil-faced boards for floors, walls and roofs.
• Flat roof boardsBoards for warm flat roof build-ups.
• Foil tape and fixingsTo seal joints and fix boards.

Delivering PIR insulation boards in Craigavon

Boards are light but bulky; they travel in wrapped packs and should be stored flat and dry. Deliveries to Northern Ireland include a sea crossing, so we quote each order individually.

• For a phased build we can split the order so materials arrive as each stage starts, which keeps the site clear.
• Weight limits on bridges or private roads near the site matter for larger lorries, so mention any you know of.
• If the drop point is block paving or soft ground, say so; heavy pallets and bulk bags can mark or sink.

Choosing PIR insulation boards

Fire considerations

PIR is a combustible product. Building regulations restrict combustible materials in some situations, such as external walls of taller buildings; check what applies.

Thickness for the U-value

The thickness you need depends on the U-value the building regulations require and the rest of the build-up. Manufacturers publish U-value tables; your designer or building control will confirm.

In Northern Ireland building work follows the Building Regulations (Northern Ireland), with guidance in the Technical Booklets, and applications go to the council's building control team.

A quick quantity check

Insulating 36 m² of rafters, floor or wall takes 14 boards of 2400 × 1200 mm including offcuts. The thickness depends on the U-value you need, so check it before you order. Try the insulation calculator

PIR Insulation Boards questions

Is there a minimum order for delivery to Craigavon?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

How thick should PIR insulation be?

It depends on where it goes and the U-value required. Pitched roofs often need 100 mm or more between and under rafters; floors and walls vary. Use the maker's U-value tables or ask your designer.

Do you deliver PIR insulation boards to trades and homeowners in Craigavon?

Both. Trades can apply for a trade account; homeowners and self-builders can order on a delivered quote.

How many PIR boards do I need?

Divide the area by 2.88 m² (one 2400 × 1200 board) and add about 5 to 10 percent for cutting.