Insulation & Drylining
PIR Insulation Boards for Brixton, delivered to site
PIR (polyisocyanurate) insulation boards are rigid foam boards with foil facings that give a lot of insulation for their thickness, used in floors, walls, pitched and flat roofs.
We deliver PIR insulation boards to sites, driveways and yards across Brixton, from a single pallet for a small job to full loads for bigger builds.

Brixton delivery at a glance
- Daylight
- About 7h 50m on the shortest day
- Delivering to
- Brixton, Greater London
- Postcode districts
- SW2, SW4, SW9, SE5
- Nearby (straight line)
- Peckham (2 mi), Pimlico (2 mi), Battersea (2 mi)
- Delivery
- Standard mainland delivery
- How it arrives
- Wrapped packs
What PIR insulation boards can we deliver to Brixton?
- General-purpose PIR boards2400 × 1200 mm foil-faced boards for floors, walls and roofs.
- Cavity wall boardsBoards sized for partial-fill cavity insulation.
- Flat roof boardsBoards for warm flat roof build-ups.
- Thermal laminate boardsPIR bonded to plasterboard.
Estimating your PIR insulation boards
Insulating 16 m² of rafters, floor or wall takes 6 boards of 2400 × 1200 mm including offcuts. The thickness depends on the U-value you need, so check it before you order. Try the insulation calculator
Delivering PIR insulation boards in Brixton
Boards are light but bulky; they travel in wrapped packs and should be stored flat and dry. Brixton is inside our standard mainland delivery area.
- Tell us the best drop point, such as a driveway, front garden or the kerb, and whether a lorry can park close to it.
- Weight limits on bridges or private roads near the site matter for larger lorries, so mention any you know of.
- On busy streets in Brixton, a parking suspension or a quiet time slot can make offloading safer, so tell us about local restrictions you know of.
Choosing PIR insulation boards
Sealing joints
Tape the joints with foil tape so the foil layer works as a continuous vapour control layer where the design relies on it.
Thickness for the U-value
The thickness you need depends on the U-value the building regulations require and the rest of the build-up. Manufacturers publish U-value tables; your designer or building control will confirm.
In England, building work is checked against the Approved Documents, for example Part A for structure and Part L for energy efficiency, through your council's building control team or a registered building control approver.
Ordering PIR insulation boards for Brixton: FAQs
Do you deliver PIR insulation boards to Brixton?
Yes. We deliver across Brixton, including SW2, SW4, SW9, SE5. Brixton is inside our standard mainland delivery area. Send your list or call 0800 088 6341 and we will price it delivered to your postcode.
Can I add other materials to my Brixton delivery?
Yes. Put everything on one list, from PIR insulation boards to fixings and PPE, and we will price it as one delivery where the products can travel together.
What is the foil for?
The foil facing reflects heat, protects the foam and, when joints are taped, can act as a vapour control layer.
How many PIR boards do I need?
Divide the area by 2.88 m² (one 2400 × 1200 board) and add about 5 to 10 percent for cutting.
PIR Insulation Boards near Brixton
- PIR Insulation Boards in Peckham
- PIR Insulation Boards in Pimlico
- PIR Insulation Boards in Battersea
- PIR Insulation Boards in Streatham
- PIR Insulation Boards in London
- PIR Insulation Boards in Chelsea
Complete your Brixton order
Send your list, get a delivered price
Tell us what you need and where it is going. We check the quantities and come back with a delivered price before you commit.
