PIR Insulation Boards delivered to Bexhill-on-Sea

PIR Insulation Boards available for Bexhill-on-Sea delivery

• Foil tape and fixingsTo seal joints and fix boards.
• Cavity wall boardsBoards sized for partial-fill cavity insulation.
• General-purpose PIR boards2400 × 1200 mm foil-faced boards for floors, walls and roofs.
• Thermal laminate boardsPIR bonded to plasterboard.
• Flat roof boardsBoards for warm flat roof build-ups.

Quantities: a worked example

Insulating 16 m² of rafters, floor or wall takes 6 boards of 2400 × 1200 mm including offcuts. The thickness depends on the U-value you need, so check it before you order. Try the insulation calculator

Before your Bexhill-on-Sea delivery arrives

Boards are light but bulky; they travel in wrapped packs and should be stored flat and dry. Bexhill-on-Sea is inside our standard mainland delivery area.

• On busy streets in Bexhill-on-Sea, a parking suspension or a quiet time slot can make offloading safer, so tell us about local restrictions you know of.
• With roughly 7h 56m of daylight in Bexhill-on-Sea around the shortest day, morning deliveries leave more working light for the job.
• If the site is up a shared drive or behind other houses, tell us the distance from the road.

Getting the right PIR insulation boards

Thickness for the U-value

The thickness you need depends on the U-value the building regulations require and the rest of the build-up. Manufacturers publish U-value tables; your designer or building control will confirm.

Sealing joints

Tape the joints with foil tape so the foil layer works as a continuous vapour control layer where the design relies on it.

In England, building work is checked against the Approved Documents, for example Part A for structure and Part L for energy efficiency, through your council's building control team or a registered building control approver.

Common questions from Bexhill-on-Sea

How thick should PIR insulation be?

It depends on where it goes and the U-value required. Pitched roofs often need 100 mm or more between and under rafters; floors and walls vary. Use the maker's U-value tables or ask your designer.

Is PIR better than mineral wool?

PIR insulates more per millimetre, so it suits tight spaces. Mineral wool is non-combustible, cheaper per square metre and better for sound.

Can you deliver PIR insulation boards to a site with restricted access in Bexhill-on-Sea?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

Can I add other materials to my Bexhill-on-Sea delivery?

Yes. Put everything on one list, from PIR insulation boards to fixings and PPE, and we will price it as one delivery where the products can travel together.