PIR Insulation Boards for Royal Tunbridge Wells, delivered to site

Our PIR insulation boards range for Royal Tunbridge Wells jobs

• Cavity wall boardsBoards sized for partial-fill cavity insulation.
• General-purpose PIR boards2400 × 1200 mm foil-faced boards for floors, walls and roofs.
• Thermal laminate boardsPIR bonded to plasterboard.
• Foil tape and fixingsTo seal joints and fix boards.

Choosing PIR insulation boards

Sealing joints

Tape the joints with foil tape so the foil layer works as a continuous vapour control layer where the design relies on it.

Thickness for the U-value

The thickness you need depends on the U-value the building regulations require and the rest of the build-up. Manufacturers publish U-value tables; your designer or building control will confirm.

In England, building work is checked against the Approved Documents, for example Part A for structure and Part L for energy efficiency, through your council's building control team or a registered building control approver.

How delivery works in Royal Tunbridge Wells

Boards are light but bulky; they travel in wrapped packs and should be stored flat and dry. Royal Tunbridge Wells is inside our standard mainland delivery area.

• On busy streets in Royal Tunbridge Wells, a parking suspension or a quiet time slot can make offloading safer, so tell us about local restrictions you know of.
• Mention any overhead cables, low branches or narrow gateways, because they decide whether a crane offload is possible.
• If neighbours share the access, it helps to let them know a lorry is coming.

Estimating your PIR insulation boards

Insulating 36 m² of rafters, floor or wall takes 14 boards of 2400 × 1200 mm including offcuts. The thickness depends on the U-value you need, so check it before you order. Try the insulation calculator

Common questions from Royal Tunbridge Wells

What is the foil for?

The foil facing reflects heat, protects the foam and, when joints are taped, can act as a vapour control layer.

Is there a minimum order for delivery to Royal Tunbridge Wells?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

Can I add other materials to my Royal Tunbridge Wells delivery?

Yes. Put everything on one list, from PIR insulation boards to fixings and PPE, and we will price it as one delivery where the products can travel together.

How thick should PIR insulation be?

It depends on where it goes and the U-value required. Pitched roofs often need 100 mm or more between and under rafters; floors and walls vary. Use the maker's U-value tables or ask your designer.