OSB, MDF & Chipboard for Worthing, delivered to site

OSB, MDF & Chipboard we supply in Worthing

• Standard MDFSmooth, stable sheets for internal joinery and shelving.
• OSB3Load-bearing board for humid conditions: floors, roofs, sheathing and site hoardings.
• P5 chipboard flooringMoisture-resistant tongue-and-groove floor decking.
• OSB3 tongue and grooveFlooring-grade OSB that locks together over joists.

Before your Worthing delivery arrives

Sheets come in packs on the lorry bed, crane-lifted or hand-offloaded. Worthing is inside our standard mainland delivery area.

• Pallets left on a pavement can block the footway, so plan a drop point inside your boundary where you can.
• If the drop point is block paving or soft ground, say so; heavy pallets and bulk bags can mark or sink.
• Mention any overhead cables, low branches or narrow gateways, because they decide whether a crane offload is possible.

Working out quantities for your Worthing job

Decking 36 m² with 2440 × 1220 mm sheets takes 14 sheets including 10% for cutting. In P5 chipboard flooring (2400 × 600 mm) the same floor takes 28 boards.

Getting the right OSB, MDF and chipboard

Which flooring?

P5 chipboard flooring is the standard moisture-resistant floor deck. 18 mm is common at 400 mm joist centres and 22 mm at 600 mm centres, but follow the maker's span table.

Cutting MDF safely

MDF dust is fine; cut with extraction and wear suitable respiratory protection.

OSB, MDF & Chipboard questions

Do you deliver OSB, MDF and chipboard to trades and homeowners in Worthing?

Both. Trades can apply for a trade account; homeowners and self-builders can order on a delivered quote.

Is MDF waterproof?

No. Moisture-resistant MDF handles humid rooms better than standard MDF but must still be sealed and kept out of direct water.

Can you deliver OSB, MDF and chipboard to a site with restricted access in Worthing?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

What is OSB3?

OSB3 is oriented strand board graded for load-bearing use in humid conditions under BS EN 300. It is the common grade for floors, roofs and sheathing.