OSB, MDF & Chipboard delivery in Portslade

What OSB, MDF and chipboard can we deliver to Portslade?

• Standard MDFSmooth, stable sheets for internal joinery and shelving.
• Moisture-resistant MDFFor bathrooms, kitchens and window boards.
• HardboardThin sheets for protection and backing.
• P5 chipboard flooringMoisture-resistant tongue-and-groove floor decking.
• OSB3Load-bearing board for humid conditions: floors, roofs, sheathing and site hoardings.

Picking the right product

Cutting MDF safely

MDF dust is fine; cut with extraction and wear suitable respiratory protection.

Which flooring?

P5 chipboard flooring is the standard moisture-resistant floor deck. 18 mm is common at 400 mm joist centres and 22 mm at 600 mm centres, but follow the maker's span table.

Working out quantities for your Portslade job

Decking 36 m² with 2440 × 1220 mm sheets takes 14 sheets including 10% for cutting. In P5 chipboard flooring (2400 × 600 mm) the same floor takes 28 boards.

Delivering OSB, MDF and chipboard in Portslade

Sheets come in packs on the lorry bed, crane-lifted or hand-offloaded. Portslade is inside our standard mainland delivery area.

• For a phased build we can split the order so materials arrive as each stage starts, which keeps the site clear.
• Deliveries are to the kerb, drive or within crane reach; ask if materials need to go further.
• On busy streets in Portslade, a parking suspension or a quiet time slot can make offloading safer, so tell us about local restrictions you know of.

Common questions from Portslade

Can you deliver OSB, MDF and chipboard to a site with restricted access in Portslade?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

Can I add other materials to my Portslade delivery?

Yes. Put everything on one list, from OSB, MDF and chipboard to fixings and PPE, and we will price it as one delivery where the products can travel together.

What chipboard flooring should I use?

P5 moisture-resistant tongue-and-groove chipboard. 18 mm is common on joists at 400 mm centres and 22 mm at 600 mm centres.

What is OSB3?

OSB3 is oriented strand board graded for load-bearing use in humid conditions under BS EN 300. It is the common grade for floors, roofs and sheathing.