OSB, MDF & Chipboard delivered to Penicuik

Our OSB, MDF and chipboard range for Penicuik jobs

• Standard MDFSmooth, stable sheets for internal joinery and shelving.
• OSB3Load-bearing board for humid conditions: floors, roofs, sheathing and site hoardings.
• P5 chipboard flooringMoisture-resistant tongue-and-groove floor decking.
• OSB3 tongue and grooveFlooring-grade OSB that locks together over joists.
• HardboardThin sheets for protection and backing.

How delivery works in Penicuik

Sheets come in packs on the lorry bed, crane-lifted or hand-offloaded. Penicuik is inside our standard mainland delivery area.

• Pallets left on a pavement can block the footway, so plan a drop point inside your boundary where you can.
• If the drop point is block paving or soft ground, say so; heavy pallets and bulk bags can mark or sink.
• With roughly 6h 59m of daylight in Penicuik around the shortest day, morning deliveries leave more working light for the job.

Sizing your order

Decking 12 m² with 2440 × 1220 mm sheets takes 5 sheets including 10% for cutting. In P5 chipboard flooring (2400 × 600 mm) the same floor takes 10 boards.

Before you order OSB, MDF and chipboard

Which flooring?

P5 chipboard flooring is the standard moisture-resistant floor deck. 18 mm is common at 400 mm joist centres and 22 mm at 600 mm centres, but follow the maker's span table.

OSB or plywood?

OSB3 is usually cheaper and fine for most structural decking in humid conditions. Plywood is stiffer, takes fixings near edges better and performs better where it may get wet.

Ordering OSB, MDF and chipboard for Penicuik: FAQs

What size are flooring boards?

Chipboard flooring is commonly 2400 × 600 mm with tongue-and-groove on all four edges.

Can you deliver OSB, MDF and chipboard to a site with restricted access in Penicuik?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

What is OSB3?

OSB3 is oriented strand board graded for load-bearing use in humid conditions under BS EN 300. It is the common grade for floors, roofs and sheathing.

Do you deliver OSB, MDF and chipboard to trades and homeowners in Penicuik?

Both. Trades can apply for a trade account; homeowners and self-builders can order on a delivered quote.