OSB, MDF & Chipboard for Newton Mearns, delivered to site

OSB, MDF & Chipboard available for Newton Mearns delivery

• OSB3Load-bearing board for humid conditions: floors, roofs, sheathing and site hoardings.
• Moisture-resistant MDFFor bathrooms, kitchens and window boards.
• HardboardThin sheets for protection and backing.
• OSB3 tongue and grooveFlooring-grade OSB that locks together over joists.
• Standard MDFSmooth, stable sheets for internal joinery and shelving.

Delivering OSB, MDF and chipboard in Newton Mearns

Sheets come in packs on the lorry bed, crane-lifted or hand-offloaded. Newton Mearns is inside our standard mainland delivery area.

• Clear a level area for pallets, ideally on boards, so materials stay out of standing water.
• Deliveries are to the kerb, drive or within crane reach; ask if materials need to go further.
• For a phased build we can split the order so materials arrive as each stage starts, which keeps the site clear.

A quick quantity check

Decking 8 m² with 2440 × 1220 mm sheets takes 3 sheets including 10% for cutting. In P5 chipboard flooring (2400 × 600 mm) the same floor takes 7 boards.

Choosing OSB, MDF and chipboard

Which flooring?

P5 chipboard flooring is the standard moisture-resistant floor deck. 18 mm is common at 400 mm joist centres and 22 mm at 600 mm centres, but follow the maker's span table.

OSB or plywood?

OSB3 is usually cheaper and fine for most structural decking in humid conditions. Plywood is stiffer, takes fixings near edges better and performs better where it may get wet.

Common questions from Newton Mearns

Is there a minimum order for delivery to Newton Mearns?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

Can you deliver OSB, MDF and chipboard to a site with restricted access in Newton Mearns?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

What size are flooring boards?

Chipboard flooring is commonly 2400 × 600 mm with tongue-and-groove on all four edges.

What chipboard flooring should I use?

P5 moisture-resistant tongue-and-groove chipboard. 18 mm is common on joists at 400 mm centres and 22 mm at 600 mm centres.