OSB, MDF & Chipboard delivered to Melton Mowbray

OSB, MDF & Chipboard available for Melton Mowbray delivery

• Moisture-resistant MDFFor bathrooms, kitchens and window boards.
• OSB3Load-bearing board for humid conditions: floors, roofs, sheathing and site hoardings.
• HardboardThin sheets for protection and backing.
• OSB3 tongue and grooveFlooring-grade OSB that locks together over joists.

Delivering OSB, MDF and chipboard in Melton Mowbray

Sheets come in packs on the lorry bed, crane-lifted or hand-offloaded. Melton Mowbray is inside our standard mainland delivery area.

• If the drop point is block paving or soft ground, say so; heavy pallets and bulk bags can mark or sink.
• Weight limits on bridges or private roads near the site matter for larger lorries, so mention any you know of.
• If neighbours share the access, it helps to let them know a lorry is coming.

Before you order OSB, MDF and chipboard

Which flooring?

P5 chipboard flooring is the standard moisture-resistant floor deck. 18 mm is common at 400 mm joist centres and 22 mm at 600 mm centres, but follow the maker's span table.

OSB or plywood?

OSB3 is usually cheaper and fine for most structural decking in humid conditions. Plywood is stiffer, takes fixings near edges better and performs better where it may get wet.

Sizing your order

Decking 12 m² with 2440 × 1220 mm sheets takes 5 sheets including 10% for cutting. In P5 chipboard flooring (2400 × 600 mm) the same floor takes 10 boards.

Common questions from Melton Mowbray

Can OSB get wet?

OSB3 copes with humid conditions and short exposure during construction, but it should not be left in the rain for long or used where it stays wet.

Can I add other materials to my Melton Mowbray delivery?

Yes. Put everything on one list, from OSB, MDF and chipboard to fixings and PPE, and we will price it as one delivery where the products can travel together.

What chipboard flooring should I use?

P5 moisture-resistant tongue-and-groove chipboard. 18 mm is common on joists at 400 mm centres and 22 mm at 600 mm centres.

Can you deliver OSB, MDF and chipboard to a site with restricted access in Melton Mowbray?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.