Cement & Aggregates
MOT Type 1 Sub-base delivered to Melton Mowbray
MOT Type 1 is a crushed stone sub-base, graded from 31.5 mm (often sold as 40 mm) down to dust, that compacts into a firm, free-draining layer under driveways, patios, paths and floor slabs.
Order MOT Type 1 for Melton Mowbray with one message: we check the quantities, price the delivery and confirm everything before you pay.

Melton Mowbray delivery at a glance
- Nearby (straight line)
- Oakham (9 mi), Loughborough (13 mi), Leicester (14 mi)
- How it arrives
- Bulk bags or tipped loads
- Daylight
- About 7h 36m on the shortest day
- Postcode districts
- LE13, LE14
- Delivering to
- Melton Mowbray, Leicestershire
- Delivery
- Standard mainland delivery
Our MOT Type 1 range for Melton Mowbray jobs
- MOT Type 1 sub-baseGraded crushed stone to Specification for Highway Works clause 803.
- HardcoreBroken masonry fill for bulking up ground.
- Bulk bags and loose loadsBulk bags for most jobs; loose loads where access and volume suit.
- Recycled Type 1Crushed recycled aggregate graded as Type 1, where suitable.
- ScalpingsCheaper granular fill for less demanding areas.
Working out quantities for your Melton Mowbray job
A 5 × 4 m area at 150 mm compacted is 3 m³. At about 2.1 tonnes per cubic metre plus 10% that is 6.9 tonnes, or around 9 bulk bags. Try the sub-base calculator
Before your Melton Mowbray delivery arrives
Bulk bags are usually crane-offloaded where access allows; very large quantities can be priced as loose tipped loads where access allows. Melton Mowbray is inside our standard mainland delivery area.
- Pallets left on a pavement can block the footway, so plan a drop point inside your boundary where you can.
- Deliveries are to the kerb, drive or within crane reach; ask if materials need to go further.
- Mention any overhead cables, low branches or narrow gateways, because they decide whether a crane offload is possible.
Choosing MOT Type 1
How deep?
Patios and paths commonly use around 100 mm of compacted sub-base, and domestic driveways around 150 mm or more. Soft ground or heavier vehicles need more; your designer or installer will confirm.
Compaction
Lay and compact in layers with a plate compactor. Allow extra material because it compacts down.
Your questions answered
Can you deliver MOT Type 1 to a site with restricted access in Melton Mowbray?
Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.
How deep should a driveway sub-base be?
Around 150 mm of compacted MOT Type 1 is common for domestic drives on firm ground; soft ground or heavier vehicles need more. Follow your installer or the paving maker's guidance.
Can you tip it loose?
For larger quantities we can price a loose tipped load if the lorry can reach and there is space to tip.
Is there a minimum order for delivery to Melton Mowbray?
There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.
Close to Melton Mowbray
- MOT Type 1 Sub-base in Oakham
- MOT Type 1 Sub-base in Loughborough
- MOT Type 1 Sub-base in Leicester
- MOT Type 1 Sub-base in Oadby
- MOT Type 1 Sub-base in Uppingham
- MOT Type 1 Sub-base in Grantham
Other materials for Melton Mowbray sites
- Roofing Materials in Melton Mowbray
- Tools & Site Safety in Melton Mowbray
- Joist Hangers & Timber Connectors in Melton Mowbray
- Metal Stud & Ceiling Systems in Melton Mowbray
- Steel & Concrete Lintels in Melton Mowbray
- Anchors, Bolts & Threaded Rod in Melton Mowbray
- Plaster & Beads in Melton Mowbray
- PIR Insulation Boards in Melton Mowbray
Send your list, get a delivered price
Tell us what you need and where it is going. We check the quantities and come back with a delivered price before you commit.
