Order OSB, MDF and chipboard for delivery in Liverpool

OSB, MDF & Chipboard available for Liverpool delivery

• Standard MDFSmooth, stable sheets for internal joinery and shelving.
• P5 chipboard flooringMoisture-resistant tongue-and-groove floor decking.
• OSB3Load-bearing board for humid conditions: floors, roofs, sheathing and site hoardings.
• OSB3 tongue and grooveFlooring-grade OSB that locks together over joists.
• Moisture-resistant MDFFor bathrooms, kitchens and window boards.

How much will you need?

Decking 15 m² with 2440 × 1220 mm sheets takes 6 sheets including 10% for cutting. In P5 chipboard flooring (2400 × 600 mm) the same floor takes 12 boards.

Delivering OSB, MDF and chipboard in Liverpool

Sheets come in packs on the lorry bed, crane-lifted or hand-offloaded. Liverpool is inside our standard mainland delivery area.

• If the drop point is block paving or soft ground, say so; heavy pallets and bulk bags can mark or sink.
• Pallets left on a pavement can block the footway, so plan a drop point inside your boundary where you can.
• If the site is up a shared drive or behind other houses, tell us the distance from the road.

Before you order OSB, MDF and chipboard

Cutting MDF safely

MDF dust is fine; cut with extraction and wear suitable respiratory protection.

Which flooring?

P5 chipboard flooring is the standard moisture-resistant floor deck. 18 mm is common at 400 mm joist centres and 22 mm at 600 mm centres, but follow the maker's span table.

Ordering OSB, MDF and chipboard for Liverpool: FAQs

Is there a minimum order for delivery to Liverpool?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

Do you deliver OSB, MDF and chipboard to trades and homeowners in Liverpool?

Both. Trades can apply for a trade account; homeowners and self-builders can order on a delivered quote.

Can OSB get wet?

OSB3 copes with humid conditions and short exposure during construction, but it should not be left in the rain for long or used where it stays wet.

What chipboard flooring should I use?

P5 moisture-resistant tongue-and-groove chipboard. 18 mm is common on joists at 400 mm centres and 22 mm at 600 mm centres.