OSB, MDF & Chipboard delivery in Annan

Which OSB, MDF and chipboard can you order in Annan?

• Moisture-resistant MDFFor bathrooms, kitchens and window boards.
• OSB3Load-bearing board for humid conditions: floors, roofs, sheathing and site hoardings.
• P5 chipboard flooringMoisture-resistant tongue-and-groove floor decking.
• OSB3 tongue and grooveFlooring-grade OSB that locks together over joists.

Getting OSB, MDF and chipboard onto your Annan site

Sheets come in packs on the lorry bed, crane-lifted or hand-offloaded. Annan is inside our standard mainland delivery area.

• Mention any overhead cables, low branches or narrow gateways, because they decide whether a crane offload is possible.
• If the drop point is block paving or soft ground, say so; heavy pallets and bulk bags can mark or sink.
• Give us the full postcode for the drop point; deliveries around DG12 are priced to the exact address.

Choosing OSB, MDF and chipboard

Cutting MDF safely

MDF dust is fine; cut with extraction and wear suitable respiratory protection.

OSB or plywood?

OSB3 is usually cheaper and fine for most structural decking in humid conditions. Plywood is stiffer, takes fixings near edges better and performs better where it may get wet.

Quantities: a worked example

Decking 12 m² with 2440 × 1220 mm sheets takes 5 sheets including 10% for cutting. In P5 chipboard flooring (2400 × 600 mm) the same floor takes 10 boards.

Ordering OSB, MDF and chipboard for Annan: FAQs

Can you deliver OSB, MDF and chipboard to a site with restricted access in Annan?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

Do you deliver OSB, MDF and chipboard to Annan?

Yes. We deliver across Annan, including DG12, DG11, DG16. Annan is inside our standard mainland delivery area. Send your list or call 0800 088 6341 and we will price it delivered to your postcode.

Is MDF waterproof?

No. Moisture-resistant MDF handles humid rooms better than standard MDF but must still be sealed and kept out of direct water.

What chipboard flooring should I use?

P5 moisture-resistant tongue-and-groove chipboard. 18 mm is common on joists at 400 mm centres and 22 mm at 600 mm centres.