MOT Type 1 Sub-base delivery in South Yorkshire

Which MOT Type 1 can you order in South Yorkshire?

• HardcoreBroken masonry fill for bulking up ground.
• Recycled Type 1Crushed recycled aggregate graded as Type 1, where suitable.
• ScalpingsCheaper granular fill for less demanding areas.
• Bulk bags and loose loadsBulk bags for most jobs; loose loads where access and volume suit.
• MOT Type 1 sub-baseGraded crushed stone to Specification for Highway Works clause 803.

MOT Type 1 Sub-base delivered in South Yorkshire towns

• MOT Type 1 Sub-base in Sheffield
• MOT Type 1 Sub-base in Rotherham
• MOT Type 1 Sub-base in Doncaster
• MOT Type 1 Sub-base in Barnsley
• MOT Type 1 Sub-base in Bentley
• MOT Type 1 Sub-base in Chapeltown
• MOT Type 1 Sub-base in Darton

Estimating your MOT Type 1

A 10 × 3 m area at 100 mm compacted is 3 m³. At about 2.1 tonnes per cubic metre plus 10% that is 6.9 tonnes, or around 9 bulk bags. Try the sub-base calculator

Planning the drop in South Yorkshire

Bulk bags are usually crane-offloaded where access allows; very large quantities can be priced as loose tipped loads where access allows. Our standard mainland delivery area covers South Yorkshire.

• On busy streets in South Yorkshire, a parking suspension or a quiet time slot can make offloading safer, so tell us about local restrictions you know of.
• If neighbours share the access, it helps to let them know a lorry is coming.
• Tell us the best drop point, such as a driveway, front garden or the kerb, and whether a lorry can park close to it.

Before you order MOT Type 1

Compaction

Lay and compact in layers with a plate compactor. Allow extra material because it compacts down.

How deep?

Patios and paths commonly use around 100 mm of compacted sub-base, and domestic driveways around 150 mm or more. Soft ground or heavier vehicles need more; your designer or installer will confirm.

Ordering MOT Type 1 for South Yorkshire: FAQs

Can I add other materials to my South Yorkshire delivery?

Yes. Put everything on one list, from MOT Type 1 to fixings and PPE, and we will price it as one delivery where the products can travel together.

Can you deliver MOT Type 1 to a site with restricted access in South Yorkshire?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

Can you tip it loose?

For larger quantities we can price a loose tipped load if the lorry can reach and there is space to tip.

How much MOT Type 1 do I need?

Multiply the area by the compacted depth to get cubic metres, then allow about 2.1 to 2.2 tonnes per cubic metre. At 100 mm deep, a tonne covers roughly 4.5 square metres.