MOT Type 1 Sub-base delivered across Shropshire

Choosing from our MOT Type 1 range

• MOT Type 1 sub-baseGraded crushed stone to Specification for Highway Works clause 803.
• Bulk bags and loose loadsBulk bags for most jobs; loose loads where access and volume suit.
• HardcoreBroken masonry fill for bulking up ground.
• ScalpingsCheaper granular fill for less demanding areas.
• Recycled Type 1Crushed recycled aggregate graded as Type 1, where suitable.

MOT Type 1 Sub-base delivered in Shropshire towns

• MOT Type 1 Sub-base in Telford
• MOT Type 1 Sub-base in Shrewsbury
• MOT Type 1 Sub-base in Wellington
• MOT Type 1 Sub-base in Oswestry

Estimating your MOT Type 1

A 5 × 5 m area at 100 mm compacted is 2.5 m³. At about 2.1 tonnes per cubic metre plus 10% that is 5.8 tonnes, or around 7 bulk bags. Try the sub-base calculator

Before your Shropshire delivery arrives

Bulk bags are usually crane-offloaded where access allows; very large quantities can be priced as loose tipped loads where access allows. Our standard mainland delivery area covers Shropshire.

• Give us the full postcode for the drop point; deliveries around TF are priced to the exact address.
• Keep cement, plaster and boards dry: have a tarpaulin or a garage space ready before they arrive.
• If the drop point is block paving or soft ground, say so; heavy pallets and bulk bags can mark or sink.

Before you order MOT Type 1

Virgin or recycled?

Recycled Type 1 can be a good option where it meets the specification; ask what your project or local authority requires.

Compaction

Lay and compact in layers with a plate compactor. Allow extra material because it compacts down.

Common questions from Shropshire

Do you deliver MOT Type 1 to trades and homeowners in Shropshire?

Both. Trades can apply for a trade account; homeowners and self-builders can order on a delivered quote.

Can you deliver MOT Type 1 to a site with restricted access in Shropshire?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

How much MOT Type 1 do I need?

Multiply the area by the compacted depth to get cubic metres, then allow about 2.1 to 2.2 tonnes per cubic metre. At 100 mm deep, a tonne covers roughly 4.5 square metres.

Can you tip it loose?

For larger quantities we can price a loose tipped load if the lorry can reach and there is space to tip.