Order MOT Type 1 for delivery in Romford

MOT Type 1 Sub-base we supply in Romford

• ScalpingsCheaper granular fill for less demanding areas.
• MOT Type 1 sub-baseGraded crushed stone to Specification for Highway Works clause 803.
• Bulk bags and loose loadsBulk bags for most jobs; loose loads where access and volume suit.
• HardcoreBroken masonry fill for bulking up ground.

Picking the right product

Virgin or recycled?

Recycled Type 1 can be a good option where it meets the specification; ask what your project or local authority requires.

Compaction

Lay and compact in layers with a plate compactor. Allow extra material because it compacts down.

Estimating your MOT Type 1

A 10 × 5 m area at 150 mm compacted is 7.5 m³. At about 2.1 tonnes per cubic metre plus 10% that is 17.3 tonnes, or around 21 bulk bags. Try the sub-base calculator

Delivery to Romford: what helps

Bulk bags are usually crane-offloaded where access allows; very large quantities can be priced as loose tipped loads where access allows. Romford is inside our standard mainland delivery area.

• Clear a level area for pallets, ideally on boards, so materials stay out of standing water.
• Mention any overhead cables, low branches or narrow gateways, because they decide whether a crane offload is possible.
• Pallets left on a pavement can block the footway, so plan a drop point inside your boundary where you can.

Ordering MOT Type 1 for Romford: FAQs

Can you tip it loose?

For larger quantities we can price a loose tipped load if the lorry can reach and there is space to tip.

Can you deliver MOT Type 1 to a site with restricted access in Romford?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

Do you deliver MOT Type 1 to Romford?

Yes. We deliver across Romford, including RM1, RM2, RM7, RM12. Romford is inside our standard mainland delivery area. Send your list or call 0800 088 6341 and we will price it delivered to your postcode.

How much MOT Type 1 do I need?

Multiply the area by the compacted depth to get cubic metres, then allow about 2.1 to 2.2 tonnes per cubic metre. At 100 mm deep, a tonne covers roughly 4.5 square metres.