Order MOT Type 1 for delivery in Redcar

MOT Type 1 Sub-base available for Redcar delivery

• MOT Type 1 sub-baseGraded crushed stone to Specification for Highway Works clause 803.
• Recycled Type 1Crushed recycled aggregate graded as Type 1, where suitable.
• HardcoreBroken masonry fill for bulking up ground.
• Bulk bags and loose loadsBulk bags for most jobs; loose loads where access and volume suit.

Before you order MOT Type 1

Virgin or recycled?

Recycled Type 1 can be a good option where it meets the specification; ask what your project or local authority requires.

Compaction

Lay and compact in layers with a plate compactor. Allow extra material because it compacts down.

Working out quantities for your Redcar job

A 6 × 3 m area at 100 mm compacted is 1.8 m³. At about 2.1 tonnes per cubic metre plus 10% that is 4.2 tonnes, or around 5 bulk bags. Try the sub-base calculator

How delivery works in Redcar

Bulk bags are usually crane-offloaded where access allows; very large quantities can be priced as loose tipped loads where access allows. Redcar is inside our standard mainland delivery area.

• Have someone on site for the delivery if you can, or agree a safe drop point with us in advance.
• If the drop point is block paving or soft ground, say so; heavy pallets and bulk bags can mark or sink.
• Keep cement, plaster and boards dry: have a tarpaulin or a garage space ready before they arrive.

Your questions answered

Is there a minimum order for delivery to Redcar?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

Do you deliver MOT Type 1 to Redcar?

Yes. We deliver across Redcar, including TS10, TS11, TS6, TS12. Redcar is inside our standard mainland delivery area. Send your list or call 0800 088 6341 and we will price it delivered to your postcode.

What is the difference between Type 1 and scalpings?

Type 1 is graded to a specification so it compacts into a strong, stable layer. Scalpings are less controlled and suit less demanding areas.

How much MOT Type 1 do I need?

Multiply the area by the compacted depth to get cubic metres, then allow about 2.1 to 2.2 tonnes per cubic metre. At 100 mm deep, a tonne covers roughly 4.5 square metres.