Building & Sharp Sand delivered to Redcar

Building & Sharp Sand we supply in Redcar

• Kiln-dried sandFine dry sand for brushing into block-paving joints.
• Soft building sandFine sand that gives smooth, workable bricklaying mortar.
• Bulk bagsTypically around 850 kg; bag weights vary by supplier.
• Plastering sandWashed sand for render and sand-and-cement plaster.
• Sharp sandCoarser grit sand for screeds, concrete and laying paving.

Before you order sand

Colour of mortar

Building sand colour changes the mortar colour. For matching existing joints, a sample is worth it.

Covering bulk bags

Cover bags to stop sand drying out or getting saturated, and keep it clean of debris.

Getting sand onto your Redcar site

Bulk bags are usually crane-lifted onto a drive or kerb where the vehicle and access allow; small bags travel with a mixed load. Redcar is inside our standard mainland delivery area.

• For a phased build we can split the order so materials arrive as each stage starts, which keeps the site clear.
• Give us the full postcode for the drop point; deliveries around TS10 are priced to the exact address.
• Pallets left on a pavement can block the footway, so plan a drop point inside your boundary where you can.

Estimating your sand

A 40 m² floor screed at 65 mm is 2.6 m³: about 4.16 tonnes of sharp sand at a 1:4 mix, or 5 bulk bags at around 850 kg each, plus the cement. Try the sand calculator

Questions about sand delivery in Redcar

What is the difference between building sand and sharp sand?

Building (soft) sand is fine and makes smooth mortar for laying bricks. Sharp sand is coarser, drains better and is used in concrete, screeds and paving beds.

Can I add other materials to my Redcar delivery?

Yes. Put everything on one list, from sand to fixings and PPE, and we will price it as one delivery where the products can travel together.

Is there a minimum order for delivery to Redcar?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

How much sand do I need for a screed?

Multiply the floor area by the screed depth to get cubic metres, then allow about 1.6 tonnes of sharp sand per cubic metre plus cement at your mix. Our sand calculator does the sums.