MOT Type 1 Sub-base delivered to New Milton

MOT Type 1 Sub-base we supply in New Milton

• MOT Type 1 sub-baseGraded crushed stone to Specification for Highway Works clause 803.
• Bulk bags and loose loadsBulk bags for most jobs; loose loads where access and volume suit.
• ScalpingsCheaper granular fill for less demanding areas.
• HardcoreBroken masonry fill for bulking up ground.
• Recycled Type 1Crushed recycled aggregate graded as Type 1, where suitable.

Things to check before you order

How deep?

Patios and paths commonly use around 100 mm of compacted sub-base, and domestic driveways around 150 mm or more. Soft ground or heavier vehicles need more; your designer or installer will confirm.

Virgin or recycled?

Recycled Type 1 can be a good option where it meets the specification; ask what your project or local authority requires.

How much will you need?

A 10 × 3 m area at 100 mm compacted is 3 m³. At about 2.1 tonnes per cubic metre plus 10% that is 6.9 tonnes, or around 9 bulk bags. Try the sub-base calculator

Before your New Milton delivery arrives

Bulk bags are usually crane-offloaded where access allows; very large quantities can be priced as loose tipped loads where access allows. New Milton is inside our standard mainland delivery area.

• Deliveries are to the kerb, drive or within crane reach; ask if materials need to go further.
• Keep cement, plaster and boards dry: have a tarpaulin or a garage space ready before they arrive.
• Clear a level area for pallets, ideally on boards, so materials stay out of standing water.

MOT Type 1 Sub-base in New Milton: questions

Can I add other materials to my New Milton delivery?

Yes. Put everything on one list, from MOT Type 1 to fixings and PPE, and we will price it as one delivery where the products can travel together.

Is there a minimum order for delivery to New Milton?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

How much MOT Type 1 do I need?

Multiply the area by the compacted depth to get cubic metres, then allow about 2.1 to 2.2 tonnes per cubic metre. At 100 mm deep, a tonne covers roughly 4.5 square metres.

Can you tip it loose?

For larger quantities we can price a loose tipped load if the lorry can reach and there is space to tip.