PIR Insulation Boards for Melton Mowbray, delivered to site

What PIR insulation boards can we deliver to Melton Mowbray?

• Flat roof boardsBoards for warm flat roof build-ups.
• Thermal laminate boardsPIR bonded to plasterboard.
• Cavity wall boardsBoards sized for partial-fill cavity insulation.
• General-purpose PIR boards2400 × 1200 mm foil-faced boards for floors, walls and roofs.
• Foil tape and fixingsTo seal joints and fix boards.

Getting PIR insulation boards onto your Melton Mowbray site

Boards are light but bulky; they travel in wrapped packs and should be stored flat and dry. Melton Mowbray is inside our standard mainland delivery area.

• On busy streets in Melton Mowbray, a parking suspension or a quiet time slot can make offloading safer, so tell us about local restrictions you know of.
• Mention any overhead cables, low branches or narrow gateways, because they decide whether a crane offload is possible.
• Clear a level area for pallets, ideally on boards, so materials stay out of standing water.

Quantities: a worked example

Insulating 30 m² of rafters, floor or wall takes 12 boards of 2400 × 1200 mm including offcuts. The thickness depends on the U-value you need, so check it before you order. Try the insulation calculator

Choosing PIR insulation boards

Fire considerations

PIR is a combustible product. Building regulations restrict combustible materials in some situations, such as external walls of taller buildings; check what applies.

Thickness for the U-value

The thickness you need depends on the U-value the building regulations require and the rest of the build-up. Manufacturers publish U-value tables; your designer or building control will confirm.

In England, building work is checked against the Approved Documents, for example Part A for structure and Part L for energy efficiency, through your council's building control team or a registered building control approver.

PIR Insulation Boards questions

Do you deliver PIR insulation boards to Melton Mowbray?

Yes. We deliver across Melton Mowbray, including LE13, LE14. Melton Mowbray is inside our standard mainland delivery area. Send your list or call 0800 088 6341 and we will price it delivered to your postcode.

How many PIR boards do I need?

Divide the area by 2.88 m² (one 2400 × 1200 board) and add about 5 to 10 percent for cutting.

Is there a minimum order for delivery to Melton Mowbray?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

Can PIR be used in external walls?

In some situations, but building regulations restrict combustible insulation in external walls of certain buildings. Check the rules for your building.