Steel & Concrete Lintels delivered to Nailsea

Choosing from our lintels range

• Prestressed concrete lintelsPlain concrete lintels for inner leaves and internal openings.
• Cavity trays and stop endsTo shed water out of the cavity over openings.
• PadstonesConcrete pads that spread the load at the ends of beams and lintels.
• Steel cavity wall lintelsInsulated galvanised lintels that support both leaves of a cavity wall.
• Single-leaf and box lintelsFor solid walls, timber frame and internal walls.

Steel & Concrete Lintels: choosing well

Which lintel for my opening?

Measure the clear opening, add the end bearing each side, and note the wall type (cavity width, inner and outer leaf) and what sits above. Manufacturers publish load tables; for anything carrying a floor, roof or point load get an engineer or building control to confirm.

Do I need a cavity tray?

Over openings in cavity walls, water in the cavity has to be directed outwards. Many steel lintels need a separate cavity tray and stop ends; check the lintel maker's detail.

In England, building work is checked against the Approved Documents, for example Part A for structure and Part L for energy efficiency, through your council's building control team or a registered building control approver.

Quantities: a worked example

For a 1,500 mm clear opening, add at least 150 mm of bearing at each end: the lintel needs to be at least 1,800 mm long. Then pick the type for the wall build-up and check the load in the manufacturer's table, or ask your engineer if the opening carries a floor or roof.

Planning the drop in Nailsea

Lintels are long, so tell us about tight access. Shorter lintels can travel with a mixed load; long steel lintels are handled by hand or crane. Nailsea is inside our standard mainland delivery area.

• Clear a level area for pallets, ideally on boards, so materials stay out of standing water.
• Weight limits on bridges or private roads near the site matter for larger lorries, so mention any you know of.
• If the site is up a shared drive or behind other houses, tell us the distance from the road.

Common questions from Nailsea

Are steel lintels insulated?

Cavity wall steel lintels usually have insulation inside to cut heat loss at the opening. Single-leaf and box lintels may not.

Can I add other materials to my Nailsea delivery?

Yes. Put everything on one list, from lintels to fixings and PPE, and we will price it as one delivery where the products can travel together.

How long should a lintel be?

The clear opening plus the end bearing at each side, typically at least 150 mm per end. Check the manufacturer's table for your lintel.

Can you deliver lintels to a site with restricted access in Nailsea?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.