Steel & Concrete Lintels delivered to Bridgend

Steel & Concrete Lintels we supply in Bridgend

• Cavity trays and stop endsTo shed water out of the cavity over openings.
• Prestressed concrete lintelsPlain concrete lintels for inner leaves and internal openings.
• Single-leaf and box lintelsFor solid walls, timber frame and internal walls.
• Heavy-duty and extra-heavy lintelsFor openings carrying floors or a lot of masonry.

How delivery works in Bridgend

Lintels are long, so tell us about tight access. Shorter lintels can travel with a mixed load; long steel lintels are handled by hand or crane. Bridgend is inside our standard mainland delivery area.

• Mention any overhead cables, low branches or narrow gateways, because they decide whether a crane offload is possible.
• Pallets left on a pavement can block the footway, so plan a drop point inside your boundary where you can.
• If neighbours share the access, it helps to let them know a lorry is coming.

Choosing lintels

Do I need a cavity tray?

Over openings in cavity walls, water in the cavity has to be directed outwards. Many steel lintels need a separate cavity tray and stop ends; check the lintel maker's detail.

Which lintel for my opening?

Measure the clear opening, add the end bearing each side, and note the wall type (cavity width, inner and outer leaf) and what sits above. Manufacturers publish load tables; for anything carrying a floor, roof or point load get an engineer or building control to confirm.

Wales has its own Approved Documents, including its own Part L for energy efficiency, and building control is handled by the local authority or a registered approver.

Quantities: a worked example

For a 1,050 mm clear opening, add at least 150 mm of bearing at each end: the lintel needs to be at least 1,350 mm long. Then pick the type for the wall build-up and check the load in the manufacturer's table, or ask your engineer if the opening carries a floor or roof.

Ordering lintels for Bridgend: FAQs

How long should a lintel be?

The clear opening plus the end bearing at each side, typically at least 150 mm per end. Check the manufacturer's table for your lintel.

Do I need building control approval for a new lintel?

Making or widening an opening in a loadbearing wall is structural work, so in most cases yes. Building control or an engineer will confirm the lintel.

Do you deliver lintels to Bridgend?

Yes. We deliver across Bridgend, including CF31, CF35, CF32. Bridgend is inside our standard mainland delivery area. Send your list or call 0800 088 6341 and we will price it delivered to your postcode.

Is there a minimum order for delivery to Bridgend?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.