PIR Insulation Boards delivered to Bridgend

Which PIR insulation boards can you order in Bridgend?

• Thermal laminate boardsPIR bonded to plasterboard.
• Foil tape and fixingsTo seal joints and fix boards.
• General-purpose PIR boards2400 × 1200 mm foil-faced boards for floors, walls and roofs.
• Cavity wall boardsBoards sized for partial-fill cavity insulation.
• Flat roof boardsBoards for warm flat roof build-ups.

A quick quantity check

Insulating 16 m² of rafters, floor or wall takes 6 boards of 2400 × 1200 mm including offcuts. The thickness depends on the U-value you need, so check it before you order. Try the insulation calculator

Choosing PIR insulation boards

Sealing joints

Tape the joints with foil tape so the foil layer works as a continuous vapour control layer where the design relies on it.

Thickness for the U-value

The thickness you need depends on the U-value the building regulations require and the rest of the build-up. Manufacturers publish U-value tables; your designer or building control will confirm.

Wales has its own Approved Documents, including its own Part L for energy efficiency, and building control is handled by the local authority or a registered approver.

Getting PIR insulation boards onto your Bridgend site

Boards are light but bulky; they travel in wrapped packs and should be stored flat and dry. Bridgend is inside our standard mainland delivery area.

• Mention any overhead cables, low branches or narrow gateways, because they decide whether a crane offload is possible.
• On busy streets in Bridgend, a parking suspension or a quiet time slot can make offloading safer, so tell us about local restrictions you know of.
• In summer Bridgend gets around 16h 38m of daylight, but early deliveries still beat the traffic and give the longest working day.

PIR Insulation Boards questions

Can you deliver PIR insulation boards to a site with restricted access in Bridgend?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

What is the foil for?

The foil facing reflects heat, protects the foam and, when joints are taped, can act as a vapour control layer.

Can I add other materials to my Bridgend delivery?

Yes. Put everything on one list, from PIR insulation boards to fixings and PPE, and we will price it as one delivery where the products can travel together.

How many PIR boards do I need?

Divide the area by 2.88 m² (one 2400 × 1200 board) and add about 5 to 10 percent for cutting.