Underground Drainage delivery in Coatbridge

Choosing from our drainage range

• Bends, junctions and couplersFittings to change direction and join branches.
• 110 mm and 160 mm pipePVC-U underground pipe in 3 m and 6 m lengths.
• Pea gravel beddingBedding and surround for pipe trenches.
• Rainwater systemsGutters, downpipes and fittings.
• Inspection chambers and coversPlastic chambers with covers rated for the location.

Working out quantities for your Coatbridge job

An 8 m run of 110 mm drain needs 3 pipes in 3 m lengths (or 2 in 6 m lengths), plus a bend or junction at each change of direction and an inspection chamber where your design shows one. Add pea gravel for bedding and surround and we will price the lot together.

Underground Drainage: choosing well

Covers for the location

Chamber covers are rated for loads, from pedestrian areas to drives. Tell us where each chamber sits.

Foul or surface water?

Foul (sewage) and surface water often need to go to different places. Check where your drains connect before you order.

In Scotland most building work needs a building warrant from the local authority, assessed against the Building Standards Technical Handbooks.

How delivery works in Coatbridge

Pipe travels in 3 m and 6 m lengths; fittings and chambers come boxed or loose with the load. Coatbridge is inside our standard mainland delivery area.

• Pallets left on a pavement can block the footway, so plan a drop point inside your boundary where you can.
• Deliveries are to the kerb, drive or within crane reach; ask if materials need to go further.
• If the drop point is block paving or soft ground, say so; heavy pallets and bulk bags can mark or sink.

Underground Drainage in Coatbridge: questions

Can you deliver drainage to a site with restricted access in Coatbridge?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

Do you deliver drainage to Coatbridge?

Yes. We deliver across Coatbridge, including ML5, ML6, G69, ML4. Coatbridge is inside our standard mainland delivery area. Send your list or call 0800 088 6341 and we will price it delivered to your postcode.

Do I need an inspection chamber?

Drains need access points at changes of direction and junctions in many cases. Your design will show where.

What size drainage pipe do I need?

110 mm is the standard size for most domestic underground foul and surface water drains; 160 mm is used for larger runs. Your design or the council's building standards service will confirm.