Underground Drainage delivered to Brierley Hill

Underground Drainage we supply in Brierley Hill

• Pea gravel beddingBedding and surround for pipe trenches.
• 110 mm and 160 mm pipePVC-U underground pipe in 3 m and 6 m lengths.
• Inspection chambers and coversPlastic chambers with covers rated for the location.
• Bends, junctions and couplersFittings to change direction and join branches.
• Soakaway cratesFor surface water where ground conditions allow.

Planning the drop in Brierley Hill

Pipe travels in 3 m and 6 m lengths; fittings and chambers come boxed or loose with the load. Brierley Hill is inside our standard mainland delivery area.

• Tell us the best drop point, such as a driveway, front garden or the kerb, and whether a lorry can park close to it.
• Weight limits on bridges or private roads near the site matter for larger lorries, so mention any you know of.
• On busy streets in Brierley Hill, a parking suspension or a quiet time slot can make offloading safer, so tell us about local restrictions you know of.

Before you order drainage

Covers for the location

Chamber covers are rated for loads, from pedestrian areas to drives. Tell us where each chamber sits.

Building over or near a sewer

Building near a public sewer may need permission from the water company. Check before you dig.

In England, building work is checked against the Approved Documents, for example Part A for structure and Part L for energy efficiency, through your council's building control team or a registered building control approver.

Estimating your drainage

A 22 m run of 110 mm drain needs 8 pipes in 3 m lengths (or 4 in 6 m lengths), plus a bend or junction at each change of direction and an inspection chamber where your design shows one. Add pea gravel for bedding and surround and we will price the lot together.

Underground Drainage questions

Can you deliver drainage to a site with restricted access in Brierley Hill?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

What fall should a drain have?

Domestic drains are commonly laid at a gradient around 1:40 to 1:80 depending on the pipe size and flow; follow your approved design or your national drainage guidance (Approved Document H in England and Wales, Technical Handbook section 3 in Scotland, Technical Booklet N in Northern Ireland).

What size drainage pipe do I need?

110 mm is the standard size for most domestic underground foul and surface water drains; 160 mm is used for larger runs. Your design or building control will confirm.

Is there a minimum order for delivery to Brierley Hill?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.