Damp Proofing & Membranes delivery in Stourport-on-Severn

Damp Proofing & Membranes we supply in Stourport-on-Severn

• Radon barriersGas-resistant membranes for areas that need radon protection.
• DPC rollsPolymer and bitumen damp-proof course in standard wall widths.
• Weep ventsFor drainage and ventilation at the base of cavities and over trays.
• Cavity trays and stop endsTo direct water out of the cavity over openings.
• DPM sheetingHeavy-gauge polythene membrane under concrete floors.

How delivery works in Stourport-on-Severn

Rolls are light enough to travel with a mixed load and are handed off at the kerb. Stourport-on-Severn is inside our standard mainland delivery area.

• Pallets left on a pavement can block the footway, so plan a drop point inside your boundary where you can.
• Tell us the best drop point, such as a driveway, front garden or the kerb, and whether a lorry can park close to it.
• Deliveries are to the kerb, drive or within crane reach; ask if materials need to go further.

Working out quantities for your Stourport-on-Severn job

An extension in Stourport-on-Severn with 12 m of cavity wall needs DPC in both leaves: about 1 roll in 30 m lengths once laps are allowed for. A 30 m² floor slab needs about 34.5 m² of DPM including laps, which is 1 roll of 4 × 25 m sheeting.

Things to check before you order

Is radon protection needed?

Parts of the UK need radon protection in new buildings and extensions. UKHSA radon maps show the areas; building control will tell you what applies.

Laps and joints

DPM and DPC need generous laps and sealed joints; follow the manufacturer's guidance.

In England, building work is checked against the Approved Documents, for example Part A for structure and Part L for energy efficiency, through your council's building control team or a registered building control approver.

Common questions from Stourport-on-Severn

What is the difference between DPC and DPM?

DPC is a strip built into walls to stop damp rising through the masonry. DPM is a sheet laid under a concrete floor slab. They are lapped together so there is no gap.

How thick should a DPM be?

1200-gauge polythene, around 300 microns, is a common specification for floor slabs. Your design may call for something different.

Can you deliver damp proofing to a site with restricted access in Stourport-on-Severn?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

Is there a minimum order for delivery to Stourport-on-Severn?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.