Building Materials
Damp Proofing & Membranes for Failsworth, delivered to site
Damp proofing materials stop moisture rising or passing through a building: a damp-proof course (DPC) in the walls and a damp-proof membrane (DPM) under the floor.
We deliver damp proofing to sites, driveways and yards across Failsworth, from a single pallet for a small job to full loads for bigger builds.

Failsworth delivery at a glance
- Delivery
- Standard mainland delivery
- Nearby (straight line)
- Droylsden (2 mi), Chadderton (3 mi), Ashton-under-Lyne (3 mi)
- How it arrives
- Rolls with a mixed load
- Postcode districts
- M35, M40, M11, M43
- Daylight
- About 7h 28m on the shortest day
- Delivering to
- Failsworth, Greater Manchester
Choosing from our damp proofing range
- Weep ventsFor drainage and ventilation at the base of cavities and over trays.
- Liquid DPM and tankingCoatings for screeds and below-ground walls.
- Cavity trays and stop endsTo direct water out of the cavity over openings.
- Radon barriersGas-resistant membranes for areas that need radon protection.
- DPM sheetingHeavy-gauge polythene membrane under concrete floors.
Getting damp proofing onto your Failsworth site
Rolls are light enough to travel with a mixed load and are handed off at the kerb. Failsworth is inside our standard mainland delivery area.
- For a phased build we can split the order so materials arrive as each stage starts, which keeps the site clear.
- On busy streets in Failsworth, a parking suspension or a quiet time slot can make offloading safer, so tell us about local restrictions you know of.
- In summer Failsworth gets around 17h 02m of daylight, but early deliveries still beat the traffic and give the longest working day.
Damp Proofing & Membranes: choosing well
DPC width
Match the DPC width to the wall leaf so it runs the full width of the masonry.
Laps and joints
DPM and DPC need generous laps and sealed joints; follow the manufacturer's guidance.
In England, building work is checked against the Approved Documents, for example Part A for structure and Part L for energy efficiency, through your council's building control team or a registered building control approver.
Estimating your damp proofing
An extension in Failsworth with 20 m of cavity wall needs DPC in both leaves: about 2 rolls in 30 m lengths once laps are allowed for. A 50 m² floor slab needs about 57.5 m² of DPM including laps, which is 1 roll of 4 × 25 m sheeting.
Damp Proofing & Membranes questions
Do I need a radon barrier?
It depends on where you are. In radon-affected areas building control requires radon protection in new buildings and extensions.
Where does the DPC go?
Usually at least 150 mm above outside ground level, linked to the floor DPM.
Can you deliver damp proofing to a site with restricted access in Failsworth?
Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.
Do you deliver damp proofing to trades and homeowners in Failsworth?
Both. Trades can apply for a trade account; homeowners and self-builders can order on a delivered quote.
Damp Proofing & Membranes near Failsworth
- Damp Proofing & Membranes in Droylsden
- Damp Proofing & Membranes in Chadderton
- Damp Proofing & Membranes in Ashton-under-Lyne
- Damp Proofing & Membranes in Oldham
- Damp Proofing & Membranes in Manchester
- Damp Proofing & Membranes in Middleton
Complete your Failsworth order
Send your list, get a delivered price
Tell us what you need and where it is going. We check the quantities and come back with a delivered price before you commit.
