Order damp proofing for delivery in Chadderton

Damp Proofing & Membranes available for Chadderton delivery

• DPC rollsPolymer and bitumen damp-proof course in standard wall widths.
• Cavity trays and stop endsTo direct water out of the cavity over openings.
• Weep ventsFor drainage and ventilation at the base of cavities and over trays.
• Radon barriersGas-resistant membranes for areas that need radon protection.
• Liquid DPM and tankingCoatings for screeds and below-ground walls.

A quick quantity check

An extension in Chadderton with 16 m of cavity wall needs DPC in both leaves: about 2 rolls in 30 m lengths once laps are allowed for. A 40 m² floor slab needs about 46 m² of DPM including laps, which is 1 roll of 4 × 25 m sheeting.

Before your Chadderton delivery arrives

Rolls are light enough to travel with a mixed load and are handed off at the kerb. Chadderton is inside our standard mainland delivery area.

• For a phased build we can split the order so materials arrive as each stage starts, which keeps the site clear.
• Mention any overhead cables, low branches or narrow gateways, because they decide whether a crane offload is possible.
• With roughly 7h 27m of daylight in Chadderton around the shortest day, morning deliveries leave more working light for the job.

Before you order damp proofing

DPC width

Match the DPC width to the wall leaf so it runs the full width of the masonry.

Is radon protection needed?

Parts of the UK need radon protection in new buildings and extensions. UKHSA radon maps show the areas; building control will tell you what applies.

In England, building work is checked against the Approved Documents, for example Part A for structure and Part L for energy efficiency, through your council's building control team or a registered building control approver.

Your questions answered

How soon can damp proofing be delivered in Chadderton?

We confirm the delivery date when we price your order, before you commit. It depends on the product, the quantity and whether it is a stock line or made to order.

How thick should a DPM be?

1200-gauge polythene, around 300 microns, is a common specification for floor slabs. Your design may call for something different.

What is the difference between DPC and DPM?

DPC is a strip built into walls to stop damp rising through the masonry. DPM is a sheet laid under a concrete floor slab. They are lapped together so there is no gap.

Do you deliver damp proofing to trades and homeowners in Chadderton?

Both. Trades can apply for a trade account; homeowners and self-builders can order on a delivered quote.