Order damp proofing for delivery in Coleraine

Damp Proofing & Membranes we supply in Coleraine

• Radon barriersGas-resistant membranes for areas that need radon protection.
• DPM sheetingHeavy-gauge polythene membrane under concrete floors.
• Cavity trays and stop endsTo direct water out of the cavity over openings.
• Liquid DPM and tankingCoatings for screeds and below-ground walls.
• Weep ventsFor drainage and ventilation at the base of cavities and over trays.

Picking the right product

Laps and joints

DPM and DPC need generous laps and sealed joints; follow the manufacturer's guidance.

DPC width

Match the DPC width to the wall leaf so it runs the full width of the masonry.

In Northern Ireland building work follows the Building Regulations (Northern Ireland), with guidance in the Technical Booklets, and applications go to the council's building control team.

Sizing your order

An extension in Coleraine with 24 m of cavity wall needs DPC in both leaves: about 2 rolls in 30 m lengths once laps are allowed for. A 50 m² floor slab needs about 57.5 m² of DPM including laps, which is 1 roll of 4 × 25 m sheeting.

Getting damp proofing onto your Coleraine site

Rolls are light enough to travel with a mixed load and are handed off at the kerb. Deliveries to Northern Ireland include a sea crossing, so we quote each order individually.

• Weight limits on bridges or private roads near the site matter for larger lorries, so mention any you know of.
• For a phased build we can split the order so materials arrive as each stage starts, which keeps the site clear.
• Have someone on site for the delivery if you can, or agree a safe drop point with us in advance.

Questions about damp proofing delivery in Coleraine

Is there a minimum order for delivery to Coleraine?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

Can I add other materials to my Coleraine delivery?

Yes. Put everything on one list, from damp proofing to fixings and PPE, and we will price it as one delivery where the products can travel together.

How thick should a DPM be?

1200-gauge polythene, around 300 microns, is a common specification for floor slabs. Your design may call for something different.

Where does the DPC go?

Usually at least 150 mm above outside ground level, linked to the floor DPM.