Damp Proofing & Membranes delivered to Bootle

Damp Proofing & Membranes available for Bootle delivery

• Weep ventsFor drainage and ventilation at the base of cavities and over trays.
• DPM sheetingHeavy-gauge polythene membrane under concrete floors.
• DPC rollsPolymer and bitumen damp-proof course in standard wall widths.
• Liquid DPM and tankingCoatings for screeds and below-ground walls.
• Radon barriersGas-resistant membranes for areas that need radon protection.

Planning the drop in Bootle

Rolls are light enough to travel with a mixed load and are handed off at the kerb. Bootle is inside our standard mainland delivery area.

• In summer Bootle gets around 17h 02m of daylight, but early deliveries still beat the traffic and give the longest working day.
• Give us the full postcode for the drop point; deliveries around L20 are priced to the exact address.
• Mention any overhead cables, low branches or narrow gateways, because they decide whether a crane offload is possible.

Sizing your order

An extension in Bootle with 24 m of cavity wall needs DPC in both leaves: about 2 rolls in 30 m lengths once laps are allowed for. A 25 m² floor slab needs about 28.7 m² of DPM including laps, which is 1 roll of 4 × 25 m sheeting.

Things to check before you order

DPC width

Match the DPC width to the wall leaf so it runs the full width of the masonry.

Laps and joints

DPM and DPC need generous laps and sealed joints; follow the manufacturer's guidance.

In England, building work is checked against the Approved Documents, for example Part A for structure and Part L for energy efficiency, through your council's building control team or a registered building control approver.

Common questions from Bootle

Is there a minimum order for delivery to Bootle?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

Can I add other materials to my Bootle delivery?

Yes. Put everything on one list, from damp proofing to fixings and PPE, and we will price it as one delivery where the products can travel together.

Where does the DPC go?

Usually at least 150 mm above outside ground level, linked to the floor DPM.

How thick should a DPM be?

1200-gauge polythene, around 300 microns, is a common specification for floor slabs. Your design may call for something different.