Damp Proofing & Membranes for Bicester, delivered to site

Our damp proofing range for Bicester jobs

• Cavity trays and stop endsTo direct water out of the cavity over openings.
• Radon barriersGas-resistant membranes for areas that need radon protection.
• Weep ventsFor drainage and ventilation at the base of cavities and over trays.
• DPM sheetingHeavy-gauge polythene membrane under concrete floors.

Planning the drop in Bicester

Rolls are light enough to travel with a mixed load and are handed off at the kerb. Bicester is inside our standard mainland delivery area.

• Have someone on site for the delivery if you can, or agree a safe drop point with us in advance.
• On busy streets in Bicester, a parking suspension or a quiet time slot can make offloading safer, so tell us about local restrictions you know of.
• If the drop point is block paving or soft ground, say so; heavy pallets and bulk bags can mark or sink.

Things to check before you order

Laps and joints

DPM and DPC need generous laps and sealed joints; follow the manufacturer's guidance.

DPC width

Match the DPC width to the wall leaf so it runs the full width of the masonry.

In England, building work is checked against the Approved Documents, for example Part A for structure and Part L for energy efficiency, through your council's building control team or a registered building control approver.

How much will you need?

An extension in Bicester with 24 m of cavity wall needs DPC in both leaves: about 2 rolls in 30 m lengths once laps are allowed for. A 20 m² floor slab needs about 23 m² of DPM including laps, which is 1 roll of 4 × 25 m sheeting.

Ordering damp proofing for Bicester: FAQs

How thick should a DPM be?

1200-gauge polythene, around 300 microns, is a common specification for floor slabs. Your design may call for something different.

Can you deliver damp proofing to a site with restricted access in Bicester?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

What is the difference between DPC and DPM?

DPC is a strip built into walls to stop damp rising through the masonry. DPM is a sheet laid under a concrete floor slab. They are lapped together so there is no gap.

How soon can damp proofing be delivered in Bicester?

We confirm the delivery date when we price your order, before you commit. It depends on the product, the quantity and whether it is a stock line or made to order.