Building Materials
Concrete & Aircrete Blocks delivery in Renfrew
Concrete blocks are large masonry units, normally 440 × 215 mm on face, that lay at about 10 blocks per square metre; they come as dense aggregate, lightweight aggregate or aircrete (aerated) blocks.
Need concrete blocks on site in Renfrew? Tell us what you are building and we will work out the quantities and price it delivered.

Renfrew delivery at a glance
- Daylight
- About 6h 58m on the shortest day
- Delivering to
- Renfrew (Renfrewshire and Inverclyde)
- Delivery
- Standard mainland delivery
- Postcode districts
- PA4, PA3
- How it arrives
- Banded pallets, usually crane offload
- Nearby (straight line)
- Clydebank (2 mi), Paisley (3 mi), Bearsden (4 mi)
What concrete blocks can we deliver to Renfrew?
- Dense concrete blocksHeavy, strong blocks for loadbearing walls, below ground and good sound separation.
- Trench and foundation blocksWide blocks laid in foundation trenches instead of lots of concrete.
- Lightweight aggregate blocksLighter to handle with better thermal performance than dense blocks.
- Hollow and cellular blocksLighter dense blocks with voids, used for some garden and retaining walls.
Delivering concrete blocks in Renfrew
Blocks are banded on pallets and usually crane-offloaded where the vehicle and access allow; tell us the weight limit of any drive or the ground where pallets will sit. Renfrew is inside our standard mainland delivery area.
- On busy streets in Renfrew, a parking suspension or a quiet time slot can make offloading safer, so tell us about local restrictions you know of.
- Mention any overhead cables, low branches or narrow gateways, because they decide whether a crane offload is possible.
- If neighbours share the access, it helps to let them know a lorry is coming.
Concrete & Aircrete Blocks: choosing well
Dense or aircrete?
Dense blocks are strong and good for sound separation but heavy; a 100 mm dense block can weigh around 20 kg. Aircrete blocks are much lighter and insulate better, which helps with energy targets, but need the right fixings.
What strength do I need?
Most houses use 3.6 N/mm² or 7.3 N/mm² blocks. Your structural design, your building standards surveyor or the block manufacturer's guidance sets the grade; tell us what is specified and we will match it.
In Scotland most building work needs a building warrant from the local authority, assessed against the Building Standards Technical Handbooks.
A quick quantity check
A single-skin block wall in Renfrew 10 m long and 2.4 m high is 24 m². At 10 blocks per square metre plus 5% you need 252 blocks, with about 0.35 tonnes of building sand and 4 bags of cement for the mortar at 1:4. Try the block calculator
Common questions from Renfrew
Is there a minimum order for delivery to Renfrew?
There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.
How many blocks per square metre?
Standard 440 × 215 mm blocks with 10 mm joints lay at about 10 blocks per square metre of wall. Add around 5 percent for cuts.
Can I add other materials to my Renfrew delivery?
Yes. Put everything on one list, from concrete blocks to fixings and PPE, and we will price it as one delivery where the products can travel together.
Are aircrete blocks strong enough for an extension?
Many aircrete blocks are designed for loadbearing walls, but grades differ. Check the strength your design calls for and the manufacturer's guidance on use below DPC.
Close to Renfrew
- Concrete & Aircrete Blocks in Clydebank
- Concrete & Aircrete Blocks in Paisley
- Concrete & Aircrete Blocks in Bearsden
- Concrete & Aircrete Blocks in Barrhead
- Concrete & Aircrete Blocks in Glasgow
- Concrete & Aircrete Blocks in Johnstone
Add to your Renfrew delivery
Send your list, get a delivered price
Tell us what you need and where it is going. We check the quantities and come back with a delivered price before you commit.
