Concrete & Aircrete Blocks delivery in Penarth

Concrete & Aircrete Blocks available for Penarth delivery

• Lightweight aggregate blocksLighter to handle with better thermal performance than dense blocks.
• Aircrete (aerated) blocksVery light, easy to cut and good insulators; check the strength grade for loadbearing work.
• Dense concrete blocksHeavy, strong blocks for loadbearing walls, below ground and good sound separation.
• Trench and foundation blocksWide blocks laid in foundation trenches instead of lots of concrete.

How delivery works in Penarth

Blocks are banded on pallets and usually crane-offloaded where the vehicle and access allow; tell us the weight limit of any drive or the ground where pallets will sit. Penarth is inside our standard mainland delivery area.

• Clear a level area for pallets, ideally on boards, so materials stay out of standing water.
• If neighbours share the access, it helps to let them know a lorry is coming.
• Have someone on site for the delivery if you can, or agree a safe drop point with us in advance.

Concrete & Aircrete Blocks: choosing well

Dense or aircrete?

Dense blocks are strong and good for sound separation but heavy; a 100 mm dense block can weigh around 20 kg. Aircrete blocks are much lighter and insulate better, which helps with energy targets, but need the right fixings.

Handling heavy blocks

Health and safety guidance discourages laying very heavy blocks by hand for long periods. Lighter blocks or planning the lift can make a big difference on site.

Wales has its own Approved Documents, including its own Part L for energy efficiency, and building control is handled by the local authority or a registered approver.

Sizing your order

A single-skin block wall in Penarth 7 m long and 2.1 m high is 14.7 m². At 10 blocks per square metre plus 5% you need 155 blocks, with about 0.21 tonnes of building sand and 2 bags of cement for the mortar at 1:4. Try the block calculator

Common questions from Penarth

Is there a minimum order for delivery to Penarth?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

How much mortar for blockwork?

Roughly 0.008 to 0.01 cubic metres of mortar per square metre of 100 mm blockwork, allowing for waste. Use our block calculator for sand and cement quantities.

Can I use blocks in the foundations?

Yes, using blocks made for below ground, often trench blocks or dense blocks of the specified strength. Building control will check foundation design.

Do you deliver concrete blocks to trades and homeowners in Penarth?

Both. Trades can apply for a trade account; homeowners and self-builders can order on a delivered quote.