Concrete & Aircrete Blocks delivered to Peckham

Concrete & Aircrete Blocks available for Peckham delivery

• Dense concrete blocksHeavy, strong blocks for loadbearing walls, below ground and good sound separation.
• Block paving and edgingsOn request alongside your sub-base and sand.
• Aircrete (aerated) blocksVery light, easy to cut and good insulators; check the strength grade for loadbearing work.
• Hollow and cellular blocksLighter dense blocks with voids, used for some garden and retaining walls.
• Trench and foundation blocksWide blocks laid in foundation trenches instead of lots of concrete.

Getting the right concrete blocks

What strength do I need?

Most houses use 3.6 N/mm² or 7.3 N/mm² blocks. Your structural design, your building control officer or the block manufacturer's guidance sets the grade; tell us what is specified and we will match it.

Thickness

100 mm is the common inner-leaf thickness. Wider blocks (140, 190, 215 mm) are used for separating walls, single-skin garage walls and foundations.

In England, building work is checked against the Approved Documents, for example Part A for structure and Part L for energy efficiency, through your council's building control team or a registered building control approver.

How delivery works in Peckham

Blocks are banded on pallets and usually crane-offloaded where the vehicle and access allow; tell us the weight limit of any drive or the ground where pallets will sit. Peckham is inside our standard mainland delivery area.

• Mention any overhead cables, low branches or narrow gateways, because they decide whether a crane offload is possible.
• Pallets left on a pavement can block the footway, so plan a drop point inside your boundary where you can.
• Deliveries are to the kerb, drive or within crane reach; ask if materials need to go further.

How much will you need?

A single-skin block wall in Peckham 4 m long and 2.4 m high is 9.6 m². At 10 blocks per square metre plus 5% you need 101 blocks, with about 0.14 tonnes of building sand and 2 bags of cement for the mortar at 1:4. Try the block calculator

Your questions answered

Can you deliver concrete blocks to a site with restricted access in Peckham?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

How much mortar for blockwork?

Roughly 0.008 to 0.01 cubic metres of mortar per square metre of 100 mm blockwork, allowing for waste. Use our block calculator for sand and cement quantities.

Is there a minimum order for delivery to Peckham?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

How many blocks per square metre?

Standard 440 × 215 mm blocks with 10 mm joints lay at about 10 blocks per square metre of wall. Add around 5 percent for cuts.