Order concrete blocks for delivery in Folkestone

What concrete blocks can we deliver to Folkestone?

• Lightweight aggregate blocksLighter to handle with better thermal performance than dense blocks.
• Hollow and cellular blocksLighter dense blocks with voids, used for some garden and retaining walls.
• Trench and foundation blocksWide blocks laid in foundation trenches instead of lots of concrete.
• Block paving and edgingsOn request alongside your sub-base and sand.
• Dense concrete blocksHeavy, strong blocks for loadbearing walls, below ground and good sound separation.

Delivering concrete blocks in Folkestone

Blocks are banded on pallets and usually crane-offloaded where the vehicle and access allow; tell us the weight limit of any drive or the ground where pallets will sit. Folkestone is inside our standard mainland delivery area.

• If the site is up a shared drive or behind other houses, tell us the distance from the road.
• Weight limits on bridges or private roads near the site matter for larger lorries, so mention any you know of.
• On busy streets in Folkestone, a parking suspension or a quiet time slot can make offloading safer, so tell us about local restrictions you know of.

Concrete & Aircrete Blocks: choosing well

Dense or aircrete?

Dense blocks are strong and good for sound separation but heavy; a 100 mm dense block can weigh around 20 kg. Aircrete blocks are much lighter and insulate better, which helps with energy targets, but need the right fixings.

What strength do I need?

Most houses use 3.6 N/mm² or 7.3 N/mm² blocks. Your structural design, your building control officer or the block manufacturer's guidance sets the grade; tell us what is specified and we will match it.

In England, building work is checked against the Approved Documents, for example Part A for structure and Part L for energy efficiency, through your council's building control team or a registered building control approver.

Working out quantities for your Folkestone job

A single-skin block wall in Folkestone 10 m long and 2.1 m high is 21 m². At 10 blocks per square metre plus 5% you need 221 blocks, with about 0.3 tonnes of building sand and 3 bags of cement for the mortar at 1:4. Try the block calculator

Ordering concrete blocks for Folkestone: FAQs

How heavy is a concrete block?

It depends on the type and thickness. A 100 mm dense block is roughly 18 to 20 kg, a lightweight block noticeably less, and an aircrete block much less again.

Is there a minimum order for delivery to Folkestone?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

Do you deliver concrete blocks to trades and homeowners in Folkestone?

Both. Trades can apply for a trade account; homeowners and self-builders can order on a delivered quote.

How many blocks per square metre?

Standard 440 × 215 mm blocks with 10 mm joints lay at about 10 blocks per square metre of wall. Add around 5 percent for cuts.