SK Trade, sktrade.co.uk

Building Materials

Concrete & Aircrete Blocks for Ashford (Kent), delivered to site

Concrete blocks are large masonry units, normally 440 × 215 mm on face, that lay at about 10 blocks per square metre; they come as dense aggregate, lightweight aggregate or aircrete (aerated) blocks.

SK Trade is a builders' merchant delivering concrete blocks into Ashford (Kent), priced to your postcode and confirmed in writing.

Pallets of grey dense concrete blocks and pale aircrete blocks beside a blockwork wall

Delivery facts for Ashford (Kent)

Postcode districts
TN24, TN23, TN25
Daylight
About 7h 53m on the shortest day
Delivery
Standard mainland delivery
Delivering to
Ashford (Kent), Kent
How it arrives
Banded pallets, usually crane offload
Nearby (straight line)
Faversham (12 mi), Canterbury (13 mi), Folkestone (13 mi)

What concrete blocks can we deliver to Ashford (Kent)?

  • Block paving and edgingsOn request alongside your sub-base and sand.
  • Aircrete (aerated) blocksVery light, easy to cut and good insulators; check the strength grade for loadbearing work.
  • Hollow and cellular blocksLighter dense blocks with voids, used for some garden and retaining walls.
  • Trench and foundation blocksWide blocks laid in foundation trenches instead of lots of concrete.

How much will you need?

A single-skin block wall in Ashford (Kent) 7 m long and 2.4 m high is 16.8 m². At 10 blocks per square metre plus 5% you need 177 blocks, with about 0.24 tonnes of building sand and 3 bags of cement for the mortar at 1:4. Try the block calculator

Things to check before you order

Dense or aircrete?

Dense blocks are strong and good for sound separation but heavy; a 100 mm dense block can weigh around 20 kg. Aircrete blocks are much lighter and insulate better, which helps with energy targets, but need the right fixings.

What strength do I need?

Most houses use 3.6 N/mm² or 7.3 N/mm² blocks. Your structural design, your building control officer or the block manufacturer's guidance sets the grade; tell us what is specified and we will match it.

In England, building work is checked against the Approved Documents, for example Part A for structure and Part L for energy efficiency, through your council's building control team or a registered building control approver.

How delivery works in Ashford (Kent)

Blocks are banded on pallets and usually crane-offloaded where the vehicle and access allow; tell us the weight limit of any drive or the ground where pallets will sit. Ashford (Kent) is inside our standard mainland delivery area.

  • Give us the full postcode for the drop point; deliveries around TN24 are priced to the exact address.
  • If the drop point is block paving or soft ground, say so; heavy pallets and bulk bags can mark or sink.
  • Deliveries are to the kerb, drive or within crane reach; ask if materials need to go further.

Common questions from Ashford (Kent)

Can I add other materials to my Ashford (Kent) delivery?

Yes. Put everything on one list, from concrete blocks to fixings and PPE, and we will price it as one delivery where the products can travel together.

Do you deliver concrete blocks to trades and homeowners in Ashford (Kent)?

Both. Trades can apply for a trade account; homeowners and self-builders can order on a delivered quote.

Can I use blocks in the foundations?

Yes, using blocks made for below ground, often trench blocks or dense blocks of the specified strength. Building control will check foundation design.

How many blocks per square metre?

Standard 440 × 215 mm blocks with 10 mm joints lay at about 10 blocks per square metre of wall. Add around 5 percent for cuts.

Send your list, get a delivered price

Tell us what you need and where it is going. We check the quantities and come back with a delivered price before you commit.

CallGet a price