Concrete & Aircrete Blocks delivered to Farnborough

Concrete & Aircrete Blocks we supply in Farnborough

• Aircrete (aerated) blocksVery light, easy to cut and good insulators; check the strength grade for loadbearing work.
• Trench and foundation blocksWide blocks laid in foundation trenches instead of lots of concrete.
• Block paving and edgingsOn request alongside your sub-base and sand.
• Lightweight aggregate blocksLighter to handle with better thermal performance than dense blocks.
• Dense concrete blocksHeavy, strong blocks for loadbearing walls, below ground and good sound separation.

Working out quantities for your Farnborough job

A single-skin block wall in Farnborough 5 m long and 2.1 m high is 10.5 m². At 10 blocks per square metre plus 5% you need 111 blocks, with about 0.15 tonnes of building sand and 2 bags of cement for the mortar at 1:4. Try the block calculator

Delivering concrete blocks in Farnborough

Blocks are banded on pallets and usually crane-offloaded where the vehicle and access allow; tell us the weight limit of any drive or the ground where pallets will sit. Farnborough is inside our standard mainland delivery area.

• If the drop point is block paving or soft ground, say so; heavy pallets and bulk bags can mark or sink.
• If the site is up a shared drive or behind other houses, tell us the distance from the road.
• Give us the full postcode for the drop point; deliveries around GU14 are priced to the exact address.

Picking the right product

Handling heavy blocks

Health and safety guidance discourages laying very heavy blocks by hand for long periods. Lighter blocks or planning the lift can make a big difference on site.

Dense or aircrete?

Dense blocks are strong and good for sound separation but heavy; a 100 mm dense block can weigh around 20 kg. Aircrete blocks are much lighter and insulate better, which helps with energy targets, but need the right fixings.

In England, building work is checked against the Approved Documents, for example Part A for structure and Part L for energy efficiency, through your council's building control team or a registered building control approver.

Common questions from Farnborough

Are aircrete blocks strong enough for an extension?

Many aircrete blocks are designed for loadbearing walls, but grades differ. Check the strength your design calls for and the manufacturer's guidance on use below DPC.

Can I add other materials to my Farnborough delivery?

Yes. Put everything on one list, from concrete blocks to fixings and PPE, and we will price it as one delivery where the products can travel together.

Is there a minimum order for delivery to Farnborough?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

How much mortar for blockwork?

Roughly 0.008 to 0.01 cubic metres of mortar per square metre of 100 mm blockwork, allowing for waste. Use our block calculator for sand and cement quantities.