SK Trade, sktrade.co.uk

Building Materials

Concrete & Aircrete Blocks delivered to Cirencester

Concrete blocks are large masonry units, normally 440 × 215 mm on face, that lay at about 10 blocks per square metre; they come as dense aggregate, lightweight aggregate or aircrete (aerated) blocks.

We deliver concrete blocks to sites, driveways and yards across Cirencester, from a single pallet for a small job to full loads for bigger builds.

Pallets of grey dense concrete blocks and pale aircrete blocks beside a blockwork wall

Delivery facts for Cirencester

Delivering to
Cirencester, Gloucestershire
Postcode districts
GL7
How it arrives
Banded pallets, usually crane offload
Nearby (straight line)
Stroud (10 mi), Cheltenham (13 mi), Swindon (14 mi)
Daylight
About 7h 47m on the shortest day
Delivery
Standard mainland delivery

Which concrete blocks can you order in Cirencester?

  • Trench and foundation blocksWide blocks laid in foundation trenches instead of lots of concrete.
  • Aircrete (aerated) blocksVery light, easy to cut and good insulators; check the strength grade for loadbearing work.
  • Block paving and edgingsOn request alongside your sub-base and sand.
  • Lightweight aggregate blocksLighter to handle with better thermal performance than dense blocks.

Before your Cirencester delivery arrives

Blocks are banded on pallets and usually crane-offloaded where the vehicle and access allow; tell us the weight limit of any drive or the ground where pallets will sit. Cirencester is inside our standard mainland delivery area.

  • Tell us the best drop point, such as a driveway, front garden or the kerb, and whether a lorry can park close to it.
  • If neighbours share the access, it helps to let them know a lorry is coming.
  • On busy streets in Cirencester, a parking suspension or a quiet time slot can make offloading safer, so tell us about local restrictions you know of.

Before you order concrete blocks

Dense or aircrete?

Dense blocks are strong and good for sound separation but heavy; a 100 mm dense block can weigh around 20 kg. Aircrete blocks are much lighter and insulate better, which helps with energy targets, but need the right fixings.

Thickness

100 mm is the common inner-leaf thickness. Wider blocks (140, 190, 215 mm) are used for separating walls, single-skin garage walls and foundations.

In England, building work is checked against the Approved Documents, for example Part A for structure and Part L for energy efficiency, through your council's building control team or a registered building control approver.

How much will you need?

A single-skin block wall in Cirencester 6 m long and 2.1 m high is 12.6 m². At 10 blocks per square metre plus 5% you need 133 blocks, with about 0.18 tonnes of building sand and 2 bags of cement for the mortar at 1:4. Try the block calculator

Common questions from Cirencester

Is there a minimum order for delivery to Cirencester?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

How heavy is a concrete block?

It depends on the type and thickness. A 100 mm dense block is roughly 18 to 20 kg, a lightweight block noticeably less, and an aircrete block much less again.

Can you deliver concrete blocks to a site with restricted access in Cirencester?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

Can I use blocks in the foundations?

Yes, using blocks made for below ground, often trench blocks or dense blocks of the specified strength. Building control will check foundation design.

Send your list, get a delivered price

Tell us what you need and where it is going. We check the quantities and come back with a delivered price before you commit.

CallGet a price