SK Trade, sktrade.co.uk

Building Materials

Concrete & Aircrete Blocks for Bishop Auckland, delivered to site

Concrete blocks are large masonry units, normally 440 × 215 mm on face, that lay at about 10 blocks per square metre; they come as dense aggregate, lightweight aggregate or aircrete (aerated) blocks.

Trades and homeowners in Bishop Auckland can order concrete blocks for delivery by sending a list, a drawing or just the sizes of the job.

Pallets of grey dense concrete blocks and pale aircrete blocks beside a blockwork wall

Your Bishop Auckland delivery

Delivery
Standard mainland delivery
Daylight
About 7h 14m on the shortest day
Delivering to
Bishop Auckland, Durham
Postcode districts
DL14, DL4
Nearby (straight line)
Newton Aycliffe (5 mi), Durham (9 mi), Darlington (10 mi)
How it arrives
Banded pallets, usually crane offload

Concrete & Aircrete Blocks available for Bishop Auckland delivery

  • Hollow and cellular blocksLighter dense blocks with voids, used for some garden and retaining walls.
  • Aircrete (aerated) blocksVery light, easy to cut and good insulators; check the strength grade for loadbearing work.
  • Dense concrete blocksHeavy, strong blocks for loadbearing walls, below ground and good sound separation.
  • Block paving and edgingsOn request alongside your sub-base and sand.

Getting concrete blocks onto your Bishop Auckland site

Blocks are banded on pallets and usually crane-offloaded where the vehicle and access allow; tell us the weight limit of any drive or the ground where pallets will sit. Bishop Auckland is inside our standard mainland delivery area.

  • Weight limits on bridges or private roads near the site matter for larger lorries, so mention any you know of.
  • Have someone on site for the delivery if you can, or agree a safe drop point with us in advance.
  • On busy streets in Bishop Auckland, a parking suspension or a quiet time slot can make offloading safer, so tell us about local restrictions you know of.

Quantities: a worked example

A single-skin block wall in Bishop Auckland 8 m long and 2.4 m high is 19.2 m². At 10 blocks per square metre plus 5% you need 202 blocks, with about 0.28 tonnes of building sand and 3 bags of cement for the mortar at 1:4. Try the block calculator

Before you order concrete blocks

Handling heavy blocks

Health and safety guidance discourages laying very heavy blocks by hand for long periods. Lighter blocks or planning the lift can make a big difference on site.

Thickness

100 mm is the common inner-leaf thickness. Wider blocks (140, 190, 215 mm) are used for separating walls, single-skin garage walls and foundations.

In England, building work is checked against the Approved Documents, for example Part A for structure and Part L for energy efficiency, through your council's building control team or a registered building control approver.

Common questions from Bishop Auckland

Do you deliver concrete blocks to Bishop Auckland?

Yes. We deliver across Bishop Auckland, including DL14, DL4. Bishop Auckland is inside our standard mainland delivery area. Send your list or call 0800 088 6341 and we will price it delivered to your postcode.

Is there a minimum order for delivery to Bishop Auckland?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

How heavy is a concrete block?

It depends on the type and thickness. A 100 mm dense block is roughly 18 to 20 kg, a lightweight block noticeably less, and an aircrete block much less again.

How much mortar for blockwork?

Roughly 0.008 to 0.01 cubic metres of mortar per square metre of 100 mm blockwork, allowing for waste. Use our block calculator for sand and cement quantities.

Send your list, get a delivered price

Tell us what you need and where it is going. We check the quantities and come back with a delivered price before you commit.

CallGet a price