Concrete & Aircrete Blocks delivered to Billericay

What concrete blocks can we deliver to Billericay?

• Dense concrete blocksHeavy, strong blocks for loadbearing walls, below ground and good sound separation.
• Aircrete (aerated) blocksVery light, easy to cut and good insulators; check the strength grade for loadbearing work.
• Block paving and edgingsOn request alongside your sub-base and sand.
• Lightweight aggregate blocksLighter to handle with better thermal performance than dense blocks.
• Trench and foundation blocksWide blocks laid in foundation trenches instead of lots of concrete.

Quantities: a worked example

A single-skin block wall in Billericay 9 m long and 2.4 m high is 21.6 m². At 10 blocks per square metre plus 5% you need 227 blocks, with about 0.31 tonnes of building sand and 3 bags of cement for the mortar at 1:4. Try the block calculator

How delivery works in Billericay

Blocks are banded on pallets and usually crane-offloaded where the vehicle and access allow; tell us the weight limit of any drive or the ground where pallets will sit. Billericay is inside our standard mainland delivery area.

• Weight limits on bridges or private roads near the site matter for larger lorries, so mention any you know of.
• With roughly 7h 48m of daylight in Billericay around the shortest day, morning deliveries leave more working light for the job.
• If neighbours share the access, it helps to let them know a lorry is coming.

Getting the right concrete blocks

What strength do I need?

Most houses use 3.6 N/mm² or 7.3 N/mm² blocks. Your structural design, your building control officer or the block manufacturer's guidance sets the grade; tell us what is specified and we will match it.

Dense or aircrete?

Dense blocks are strong and good for sound separation but heavy; a 100 mm dense block can weigh around 20 kg. Aircrete blocks are much lighter and insulate better, which helps with energy targets, but need the right fixings.

In England, building work is checked against the Approved Documents, for example Part A for structure and Part L for energy efficiency, through your council's building control team or a registered building control approver.

Common questions from Billericay

Can you deliver concrete blocks to a site with restricted access in Billericay?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

What is the difference between 3.6 and 7.3 N/mm² blocks?

The number is the compressive strength. 7.3 N/mm² blocks carry more load and are often specified below ground or for heavily loaded walls; 3.6 N/mm² is common for upper storeys and partitions. Follow your drawings.

Do you deliver concrete blocks to trades and homeowners in Billericay?

Both. Trades can apply for a trade account; homeowners and self-builders can order on a delivered quote.

How many blocks on a pallet?

It varies with the block size and maker. We confirm the pallet quantity with your price.