Concrete & Aircrete Blocks for Banbury, delivered to site

Concrete & Aircrete Blocks available for Banbury delivery

• Trench and foundation blocksWide blocks laid in foundation trenches instead of lots of concrete.
• Dense concrete blocksHeavy, strong blocks for loadbearing walls, below ground and good sound separation.
• Lightweight aggregate blocksLighter to handle with better thermal performance than dense blocks.
• Hollow and cellular blocksLighter dense blocks with voids, used for some garden and retaining walls.

Getting concrete blocks onto your Banbury site

Blocks are banded on pallets and usually crane-offloaded where the vehicle and access allow; tell us the weight limit of any drive or the ground where pallets will sit. Banbury is inside our standard mainland delivery area.

• If the drop point is block paving or soft ground, say so; heavy pallets and bulk bags can mark or sink.
• Keep cement, plaster and boards dry: have a tarpaulin or a garage space ready before they arrive.
• On busy streets in Banbury, a parking suspension or a quiet time slot can make offloading safer, so tell us about local restrictions you know of.

A quick quantity check

A single-skin block wall in Banbury 7 m long and 2.1 m high is 14.7 m². At 10 blocks per square metre plus 5% you need 155 blocks, with about 0.21 tonnes of building sand and 2 bags of cement for the mortar at 1:4. Try the block calculator

Concrete & Aircrete Blocks: choosing well

Thickness

100 mm is the common inner-leaf thickness. Wider blocks (140, 190, 215 mm) are used for separating walls, single-skin garage walls and foundations.

Dense or aircrete?

Dense blocks are strong and good for sound separation but heavy; a 100 mm dense block can weigh around 20 kg. Aircrete blocks are much lighter and insulate better, which helps with energy targets, but need the right fixings.

In England, building work is checked against the Approved Documents, for example Part A for structure and Part L for energy efficiency, through your council's building control team or a registered building control approver.

Your questions answered

Is there a minimum order for delivery to Banbury?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

How many blocks per square metre?

Standard 440 × 215 mm blocks with 10 mm joints lay at about 10 blocks per square metre of wall. Add around 5 percent for cuts.

Can you deliver concrete blocks to a site with restricted access in Banbury?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

Are aircrete blocks strong enough for an extension?

Many aircrete blocks are designed for loadbearing walls, but grades differ. Check the strength your design calls for and the manufacturer's guidance on use below DPC.