SK Trade, sktrade.co.uk

Building Materials

Concrete & Aircrete Blocks delivery in Aston

Concrete blocks are large masonry units, normally 440 × 215 mm on face, that lay at about 10 blocks per square metre; they come as dense aggregate, lightweight aggregate or aircrete (aerated) blocks.

Order concrete blocks for Aston with one message: we check the quantities, price the delivery and confirm everything before you pay.

Pallets of grey dense concrete blocks and pale aircrete blocks beside a blockwork wall

Concrete & Aircrete Blocks to Aston: the basics

Daylight
About 7h 39m on the shortest day
Postcode districts
B6, B7, B8, B42
Nearby (straight line)
Birmingham (1 mi), Smethwick (4 mi), West Bromwich (5 mi)
Delivering to
Aston, West Midlands
How it arrives
Banded pallets, usually crane offload
Delivery
Standard mainland delivery

Which concrete blocks can you order in Aston?

  • Hollow and cellular blocksLighter dense blocks with voids, used for some garden and retaining walls.
  • Trench and foundation blocksWide blocks laid in foundation trenches instead of lots of concrete.
  • Lightweight aggregate blocksLighter to handle with better thermal performance than dense blocks.
  • Block paving and edgingsOn request alongside your sub-base and sand.

Estimating your concrete blocks

A single-skin block wall in Aston 5 m long and 2.7 m high is 13.5 m². At 10 blocks per square metre plus 5% you need 142 blocks, with about 0.2 tonnes of building sand and 2 bags of cement for the mortar at 1:4. Try the block calculator

Delivery to Aston: what helps

Blocks are banded on pallets and usually crane-offloaded where the vehicle and access allow; tell us the weight limit of any drive or the ground where pallets will sit. Aston is inside our standard mainland delivery area.

  • Clear a level area for pallets, ideally on boards, so materials stay out of standing water.
  • If the drop point is block paving or soft ground, say so; heavy pallets and bulk bags can mark or sink.
  • Deliveries are to the kerb, drive or within crane reach; ask if materials need to go further.

Choosing concrete blocks

What strength do I need?

Most houses use 3.6 N/mm² or 7.3 N/mm² blocks. Your structural design, your building control officer or the block manufacturer's guidance sets the grade; tell us what is specified and we will match it.

Dense or aircrete?

Dense blocks are strong and good for sound separation but heavy; a 100 mm dense block can weigh around 20 kg. Aircrete blocks are much lighter and insulate better, which helps with energy targets, but need the right fixings.

In England, building work is checked against the Approved Documents, for example Part A for structure and Part L for energy efficiency, through your council's building control team or a registered building control approver.

Common questions from Aston

Do you deliver concrete blocks to trades and homeowners in Aston?

Both. Trades can apply for a trade account; homeowners and self-builders can order on a delivered quote.

Can I add other materials to my Aston delivery?

Yes. Put everything on one list, from concrete blocks to fixings and PPE, and we will price it as one delivery where the products can travel together.

How many blocks on a pallet?

It varies with the block size and maker. We confirm the pallet quantity with your price.

Can I use blocks in the foundations?

Yes, using blocks made for below ground, often trench blocks or dense blocks of the specified strength. Building control will check foundation design.

Send your list, get a delivered price

Tell us what you need and where it is going. We check the quantities and come back with a delivered price before you commit.

CallGet a price