CLS Studwork Timber delivered across Wiltshire

Which CLS timber can you order in Wiltshire?

• Noggins and head platesCut from the same stock.
• 38 × 63 mm CLSFor non-loadbearing partitions and boxing in.
• 38 × 89 mm CLSFor taller partitions, more insulation depth or heavier boards.
• FixingsScrews, nails and frame fixings to suit.
• Graded CLSC16 or C24 graded CLS for loadbearing studwork where specified.

CLS Studwork Timber delivered in Wiltshire towns

• CLS Studwork Timber in Swindon
• CLS Studwork Timber in Salisbury
• CLS Studwork Timber in Trowbridge
• CLS Studwork Timber in Chippenham

How much will you need?

A 3.6 m partition 2.4 m high at 400 mm centres takes 10 CLS studs, 7.2 m of head and sole plate and a row of noggins, then boarding on both sides. Work out the boards too

Delivering CLS timber in Wiltshire

CLS travels in bundles alongside plasterboard and is easy to hand off at the kerb. Our standard mainland delivery area covers Wiltshire.

• Clear a level area for pallets, ideally on boards, so materials stay out of standing water.
• On busy streets in Wiltshire, a parking suspension or a quiet time slot can make offloading safer, so tell us about local restrictions you know of.
• If the drop point is block paving or soft ground, say so; heavy pallets and bulk bags can mark or sink.

Getting the right CLS timber

Stud spacing

Studs are usually set at 400 mm or 600 mm centres to suit 1200 mm wide plasterboard.

Loadbearing walls

If the wall carries load it needs graded timber to a design. Plain CLS is not automatically structural.

Questions about CLS timber delivery in Wiltshire

What does CLS stand for?

Canadian Lumber Standard. It refers to the way the timber is dried, planed and finished with rounded edges.

Can you deliver CLS timber to a site with restricted access in Wiltshire?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

Do you deliver CLS timber to Wiltshire?

Yes. We deliver across Wiltshire, including SN, SP, BA. Our standard mainland delivery area covers Wiltshire. Send your list or call 0800 088 6341 and we will price it delivered to your postcode.

How many studs do I need?

Divide the wall length by the stud spacing (400 or 600 mm), add one, then add plates and noggins. Our plasterboard calculator gives the boards for the same wall.