CLS Studwork Timber for Whitchurch, delivered to site

What CLS timber can we deliver to Whitchurch?

• Graded CLSC16 or C24 graded CLS for loadbearing studwork where specified.
• 38 × 89 mm CLSFor taller partitions, more insulation depth or heavier boards.
• 38 × 63 mm CLSFor non-loadbearing partitions and boxing in.
• FixingsScrews, nails and frame fixings to suit.

How delivery works in Whitchurch

CLS travels in bundles alongside plasterboard and is easy to hand off at the kerb. Whitchurch is inside our standard mainland delivery area.

• In summer Whitchurch gets around 16h 38m of daylight, but early deliveries still beat the traffic and give the longest working day.
• With roughly 7h 49m of daylight in Whitchurch around the shortest day, morning deliveries leave more working light for the job.
• Pallets left on a pavement can block the footway, so plan a drop point inside your boundary where you can.

Working out quantities for your Whitchurch job

A 5.4 m partition 2.4 m high at 400 mm centres takes 15 CLS studs, 10.8 m of head and sole plate and a row of noggins, then boarding on both sides. Work out the boards too

Things to check before you order

Which size?

38 × 63 mm suits most partitions up to standard ceiling heights. 38 × 89 mm gives stiffer, taller walls and more room for insulation.

Loadbearing walls

If the wall carries load it needs graded timber to a design. Plain CLS is not automatically structural.

Common questions from Whitchurch

Can CLS be used for loadbearing walls?

Only if it is strength graded and the wall is designed for the load. Ask for graded CLS if your design calls for it.

Is there a minimum order for delivery to Whitchurch?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

Can I add other materials to my Whitchurch delivery?

Yes. Put everything on one list, from CLS timber to fixings and PPE, and we will price it as one delivery where the products can travel together.

How many studs do I need?

Divide the wall length by the stud spacing (400 or 600 mm), add one, then add plates and noggins. Our plasterboard calculator gives the boards for the same wall.