CLS Studwork Timber for sites in Warwickshire

Which CLS timber can you order in Warwickshire?

• 38 × 63 mm CLSFor non-loadbearing partitions and boxing in.
• Noggins and head platesCut from the same stock.
• 38 × 89 mm CLSFor taller partitions, more insulation depth or heavier boards.
• FixingsScrews, nails and frame fixings to suit.
• Graded CLSC16 or C24 graded CLS for loadbearing studwork where specified.

CLS Studwork Timber delivered in Warwickshire towns

• CLS Studwork Timber in Nuneaton
• CLS Studwork Timber in Rugby
• CLS Studwork Timber in Royal Leamington Spa
• CLS Studwork Timber in Warwick
• CLS Studwork Timber in Bedworth
• CLS Studwork Timber in Stratford-upon-Avon
• CLS Studwork Timber in Kenilworth

Working out quantities for your Warwickshire job

A 2.4 m partition 2.4 m high at 400 mm centres takes 7 CLS studs, 4.8 m of head and sole plate and a row of noggins, then boarding on both sides. Work out the boards too

Getting CLS timber onto your Warwickshire site

CLS travels in bundles alongside plasterboard and is easy to hand off at the kerb. Our standard mainland delivery area covers Warwickshire.

• Pallets left on a pavement can block the footway, so plan a drop point inside your boundary where you can.
• On busy streets in Warwickshire, a parking suspension or a quiet time slot can make offloading safer, so tell us about local restrictions you know of.
• If the drop point is block paving or soft ground, say so; heavy pallets and bulk bags can mark or sink.

Before you order CLS timber

Loadbearing walls

If the wall carries load it needs graded timber to a design. Plain CLS is not automatically structural.

Which size?

38 × 63 mm suits most partitions up to standard ceiling heights. 38 × 89 mm gives stiffer, taller walls and more room for insulation.

Questions about CLS timber delivery in Warwickshire

How many studs do I need?

Divide the wall length by the stud spacing (400 or 600 mm), add one, then add plates and noggins. Our plasterboard calculator gives the boards for the same wall.

Can you deliver CLS timber to a site with restricted access in Warwickshire?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

How soon can CLS timber be delivered in Warwickshire?

We confirm the delivery date when we price your order, before you commit. It depends on the product, the quantity and whether it is a stock line or made to order.

Can CLS be used for loadbearing walls?

Only if it is strength graded and the wall is designed for the load. Ask for graded CLS if your design calls for it.