CLS Studwork Timber delivery in Walton-on-Thames

Which CLS timber can you order in Walton-on-Thames?

• FixingsScrews, nails and frame fixings to suit.
• Graded CLSC16 or C24 graded CLS for loadbearing studwork where specified.
• 38 × 89 mm CLSFor taller partitions, more insulation depth or heavier boards.
• 38 × 63 mm CLSFor non-loadbearing partitions and boxing in.
• Noggins and head platesCut from the same stock.

Quantities: a worked example

A 4.8 m partition 2.4 m high at 400 mm centres takes 13 CLS studs, 9.6 m of head and sole plate and a row of noggins, then boarding on both sides. Work out the boards too

CLS Studwork Timber: choosing well

Which size?

38 × 63 mm suits most partitions up to standard ceiling heights. 38 × 89 mm gives stiffer, taller walls and more room for insulation.

Loadbearing walls

If the wall carries load it needs graded timber to a design. Plain CLS is not automatically structural.

Before your Walton-on-Thames delivery arrives

CLS travels in bundles alongside plasterboard and is easy to hand off at the kerb. Walton-on-Thames is inside our standard mainland delivery area.

• Mention any overhead cables, low branches or narrow gateways, because they decide whether a crane offload is possible.
• Weight limits on bridges or private roads near the site matter for larger lorries, so mention any you know of.
• In summer Walton-on-Thames gets around 16h 37m of daylight, but early deliveries still beat the traffic and give the longest working day.

Ordering CLS timber for Walton-on-Thames: FAQs

Do you deliver CLS timber to Walton-on-Thames?

Yes. We deliver across Walton-on-Thames, including KT12, TW16, TW17, KT8. Walton-on-Thames is inside our standard mainland delivery area. Send your list or call 0800 088 6341 and we will price it delivered to your postcode.

How soon can CLS timber be delivered in Walton-on-Thames?

We confirm the delivery date when we price your order, before you commit. It depends on the product, the quantity and whether it is a stock line or made to order.

How many studs do I need?

Divide the wall length by the stud spacing (400 or 600 mm), add one, then add plates and noggins. Our plasterboard calculator gives the boards for the same wall.

Can CLS be used for loadbearing walls?

Only if it is strength graded and the wall is designed for the load. Ask for graded CLS if your design calls for it.