SK Trade, sktrade.co.uk

Timber & Sheets

CLS Studwork Timber for Urmston, delivered to site

CLS (Canadian Lumber Standard) timber is kiln-dried, planed softwood with rounded edges, sized at 38 × 63 mm and 38 × 89 mm, used mainly for internal stud walls.

Order CLS timber for Urmston with one message: we check the quantities, price the delivery and confirm everything before you pay.

A timber stud wall frame built from pale CLS studwork with spare lengths stacked on the floor

Your Urmston delivery

Delivering to
Urmston, Greater Manchester
Daylight
About 7h 29m on the shortest day
Postcode districts
M41, M32, M31, M33
Delivery
Standard mainland delivery
How it arrives
Bundles with your boards
Nearby (straight line)
Stretford (2 mi), Sale (2 mi), Eccles (3 mi)

CLS Studwork Timber we supply in Urmston

  • Noggins and head platesCut from the same stock.
  • 38 × 89 mm CLSFor taller partitions, more insulation depth or heavier boards.
  • 38 × 63 mm CLSFor non-loadbearing partitions and boxing in.
  • FixingsScrews, nails and frame fixings to suit.

Estimating your CLS timber

A 4.2 m partition 2.4 m high at 400 mm centres takes 12 CLS studs, 8.4 m of head and sole plate and a row of noggins, then boarding on both sides. Work out the boards too

Planning the drop in Urmston

CLS travels in bundles alongside plasterboard and is easy to hand off at the kerb. Urmston is inside our standard mainland delivery area.

  • Tell us the best drop point, such as a driveway, front garden or the kerb, and whether a lorry can park close to it.
  • If the drop point is block paving or soft ground, say so; heavy pallets and bulk bags can mark or sink.
  • Weight limits on bridges or private roads near the site matter for larger lorries, so mention any you know of.

Getting the right CLS timber

Stud spacing

Studs are usually set at 400 mm or 600 mm centres to suit 1200 mm wide plasterboard.

Which size?

38 × 63 mm suits most partitions up to standard ceiling heights. 38 × 89 mm gives stiffer, taller walls and more room for insulation.

Your questions answered

Can I add other materials to my Urmston delivery?

Yes. Put everything on one list, from CLS timber to fixings and PPE, and we will price it as one delivery where the products can travel together.

How many studs do I need?

Divide the wall length by the stud spacing (400 or 600 mm), add one, then add plates and noggins. Our plasterboard calculator gives the boards for the same wall.

Can CLS be used for loadbearing walls?

Only if it is strength graded and the wall is designed for the load. Ask for graded CLS if your design calls for it.

Can you deliver CLS timber to a site with restricted access in Urmston?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

Send your list, get a delivered price

Tell us what you need and where it is going. We check the quantities and come back with a delivered price before you commit.

CallGet a price