Order CLS timber for delivery in Tottenham

Our CLS timber range for Tottenham jobs

• Noggins and head platesCut from the same stock.
• FixingsScrews, nails and frame fixings to suit.
• Graded CLSC16 or C24 graded CLS for loadbearing studwork where specified.
• 38 × 63 mm CLSFor non-loadbearing partitions and boxing in.
• 38 × 89 mm CLSFor taller partitions, more insulation depth or heavier boards.

Getting the right CLS timber

Which size?

38 × 63 mm suits most partitions up to standard ceiling heights. 38 × 89 mm gives stiffer, taller walls and more room for insulation.

Stud spacing

Studs are usually set at 400 mm or 600 mm centres to suit 1200 mm wide plasterboard.

A quick quantity check

A 4.2 m partition 2.4 m high at 400 mm centres takes 12 CLS studs, 8.4 m of head and sole plate and a row of noggins, then boarding on both sides. Work out the boards too

Planning the drop in Tottenham

CLS travels in bundles alongside plasterboard and is easy to hand off at the kerb. Tottenham is inside our standard mainland delivery area.

• If the drop point is block paving or soft ground, say so; heavy pallets and bulk bags can mark or sink.
• With roughly 7h 48m of daylight in Tottenham around the shortest day, morning deliveries leave more working light for the job.
• In summer Tottenham gets around 16h 39m of daylight, but early deliveries still beat the traffic and give the longest working day.

Questions about CLS timber delivery in Tottenham

Is there a minimum order for delivery to Tottenham?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

How many studs do I need?

Divide the wall length by the stud spacing (400 or 600 mm), add one, then add plates and noggins. Our plasterboard calculator gives the boards for the same wall.

Do you deliver CLS timber to trades and homeowners in Tottenham?

Both. Trades can apply for a trade account; homeowners and self-builders can order on a delivered quote.

Is CLS timber treated?

CLS is kiln dried rather than treated as standard, because it is meant for dry internal use. Treated CLS is available if you need it.