CLS Studwork Timber for Tonypandy, delivered to site

What CLS timber can we deliver to Tonypandy?

• Noggins and head platesCut from the same stock.
• 38 × 89 mm CLSFor taller partitions, more insulation depth or heavier boards.
• FixingsScrews, nails and frame fixings to suit.
• 38 × 63 mm CLSFor non-loadbearing partitions and boxing in.
• Graded CLSC16 or C24 graded CLS for loadbearing studwork where specified.

Planning the drop in Tonypandy

CLS travels in bundles alongside plasterboard and is easy to hand off at the kerb. Tonypandy is inside our standard mainland delivery area.

• Give us the full postcode for the drop point; deliveries around CF40 are priced to the exact address.
• With roughly 7h 48m of daylight in Tonypandy around the shortest day, morning deliveries leave more working light for the job.
• On busy streets in Tonypandy, a parking suspension or a quiet time slot can make offloading safer, so tell us about local restrictions you know of.

Quantities: a worked example

A 3.6 m partition 2.4 m high at 400 mm centres takes 10 CLS studs, 7.2 m of head and sole plate and a row of noggins, then boarding on both sides. Work out the boards too

Picking the right product

Stud spacing

Studs are usually set at 400 mm or 600 mm centres to suit 1200 mm wide plasterboard.

Which size?

38 × 63 mm suits most partitions up to standard ceiling heights. 38 × 89 mm gives stiffer, taller walls and more room for insulation.

Your questions answered

What is the difference between CLS and planed timber?

CLS has rounded edges and is sized for studwork; planed all round timber has square edges and comes in many more sizes for joinery and trim.

Can I add other materials to my Tonypandy delivery?

Yes. Put everything on one list, from CLS timber to fixings and PPE, and we will price it as one delivery where the products can travel together.

Is there a minimum order for delivery to Tonypandy?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

Can CLS be used for loadbearing walls?

Only if it is strength graded and the wall is designed for the load. Ask for graded CLS if your design calls for it.