Order CLS timber for delivery in Stoke-on-Trent

CLS Studwork Timber available for Stoke-on-Trent delivery

• Graded CLSC16 or C24 graded CLS for loadbearing studwork where specified.
• FixingsScrews, nails and frame fixings to suit.
• 38 × 89 mm CLSFor taller partitions, more insulation depth or heavier boards.
• Noggins and head platesCut from the same stock.
• 38 × 63 mm CLSFor non-loadbearing partitions and boxing in.

Things to check before you order

Loadbearing walls

If the wall carries load it needs graded timber to a design. Plain CLS is not automatically structural.

Which size?

38 × 63 mm suits most partitions up to standard ceiling heights. 38 × 89 mm gives stiffer, taller walls and more room for insulation.

Planning the drop in Stoke-on-Trent

CLS travels in bundles alongside plasterboard and is easy to hand off at the kerb. Stoke-on-Trent is inside our standard mainland delivery area.

• If the drop point is block paving or soft ground, say so; heavy pallets and bulk bags can mark or sink.
• Give us the full postcode for the drop point; deliveries around ST4 are priced to the exact address.
• With roughly 7h 34m of daylight in Stoke-on-Trent around the shortest day, morning deliveries leave more working light for the job.

Working out quantities for your Stoke-on-Trent job

A 5.4 m partition 2.4 m high at 400 mm centres takes 15 CLS studs, 10.8 m of head and sole plate and a row of noggins, then boarding on both sides. Work out the boards too

Common questions from Stoke-on-Trent

Do you deliver CLS timber to Stoke-on-Trent?

Yes. We deliver across Stoke-on-Trent, including ST4, ST1, ST2, ST5. Stoke-on-Trent is inside our standard mainland delivery area. Send your list or call 0800 088 6341 and we will price it delivered to your postcode.

Is there a minimum order for delivery to Stoke-on-Trent?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

What is the difference between CLS and planed timber?

CLS has rounded edges and is sized for studwork; planed all round timber has square edges and comes in many more sizes for joinery and trim.

Is CLS timber treated?

CLS is kiln dried rather than treated as standard, because it is meant for dry internal use. Treated CLS is available if you need it.