Timber & Sheets
Order CLS timber for delivery in Selkirk
CLS (Canadian Lumber Standard) timber is kiln-dried, planed softwood with rounded edges, sized at 38 × 63 mm and 38 × 89 mm, used mainly for internal stud walls.
Need CLS timber on site in Selkirk? Tell us what you are building and we will work out the quantities and price it delivered.

Delivery facts for Selkirk
- Delivering to
- Selkirk, Scottish Borders
- How it arrives
- Bundles with your boards
- Daylight
- About 7h 03m on the shortest day
- Delivery
- Standard mainland delivery
- Postcode districts
- TD7
- Nearby (straight line)
- Galashiels (5 mi), Hawick (9 mi), Peebles (15 mi)
Choosing from our CLS timber range
- 38 × 63 mm CLSFor non-loadbearing partitions and boxing in.
- Noggins and head platesCut from the same stock.
- FixingsScrews, nails and frame fixings to suit.
- Graded CLSC16 or C24 graded CLS for loadbearing studwork where specified.
Working out quantities for your Selkirk job
A 5.4 m partition 2.4 m high at 400 mm centres takes 15 CLS studs, 10.8 m of head and sole plate and a row of noggins, then boarding on both sides. Work out the boards too
CLS Studwork Timber: choosing well
Which size?
38 × 63 mm suits most partitions up to standard ceiling heights. 38 × 89 mm gives stiffer, taller walls and more room for insulation.
Stud spacing
Studs are usually set at 400 mm or 600 mm centres to suit 1200 mm wide plasterboard.
Before your Selkirk delivery arrives
CLS travels in bundles alongside plasterboard and is easy to hand off at the kerb. Selkirk is inside our standard mainland delivery area.
- If the drop point is block paving or soft ground, say so; heavy pallets and bulk bags can mark or sink.
- Weight limits on bridges or private roads near the site matter for larger lorries, so mention any you know of.
- Keep cement, plaster and boards dry: have a tarpaulin or a garage space ready before they arrive.
Ordering CLS timber for Selkirk: FAQs
How many studs do I need?
Divide the wall length by the stud spacing (400 or 600 mm), add one, then add plates and noggins. Our plasterboard calculator gives the boards for the same wall.
Is CLS timber treated?
CLS is kiln dried rather than treated as standard, because it is meant for dry internal use. Treated CLS is available if you need it.
Can you deliver CLS timber to a site with restricted access in Selkirk?
Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.
Do you deliver CLS timber to trades and homeowners in Selkirk?
Both. Trades can apply for a trade account; homeowners and self-builders can order on a delivered quote.
CLS Studwork Timber in neighbouring towns
- CLS Studwork Timber in Galashiels
- CLS Studwork Timber in Hawick
- CLS Studwork Timber in Peebles
- CLS Studwork Timber in Kelso
- CLS Studwork Timber in Penicuik
- CLS Studwork Timber in Bonnyrigg
Complete your Selkirk order
Send your list, get a delivered price
Tell us what you need and where it is going. We check the quantities and come back with a delivered price before you commit.
